This cable requires a Bachmann controller and power clip to operate.

Operating modes: Direct bus connection to ECoSlink. Operation with ECoS or Central Station Reloaded V3.0.0. possible. Feedback: 16 feedback sensors, configurable via jumpers as digital inputs (e.g., for track tracks or reed contacts) or as track occupancy detectors (current sensors). Galvanic isolation of the sensors from the control panel, maximum 3A current load per feedback input. RailCom®: 4 of the 16 sensors can be configured on request as a RailCom detector ("local detector"). Detection of

GER: PSD XP Sound E669.1 CSD PluX22 + Lautsprecher

Function Decoder, 20.5 x 15 x 3.5 mm, 1.2 A, 8 function outputs, energy storage terminal, with 21MTC interface NEM660.

GER: PSD S G 1700 PluX22

Decoder MX617N NEM651 6-pin pin strip, 13 x 9 x 2.5 mm, 24 V Voltage resistance, 0.7 A, 6 function outputs, no SUSI pins.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read),

The Mobile Control Pro is ESU's latest answer to the question of how to combine the advantages of smartphone technology with the needs of model railway control. The Mobile Control Pro is essentially a compact Android-based tablet equipped with controls for controlling your locomotives and magnetic accessories. The connection to the digital command station is established exclusively wirelessly via Wi-Fi. A specially designed app by ESU can communicate directly with a variety of digital command st

The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions. LokPilot 5 micro decoders are o

The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions. LokPilot 5 micro decoders are o

The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. Operating modes: The LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters al

LokPilot 5 Fx micro DCC function decoder Next18 NEM662The LokPilot 5 Fx micro DCC are versatile function decoders with a Next18 interface on a base area of ??13.0mm x 9.2mm. They are used in all vehicles of nominal sizes N to H0 that do not have an engine output, but should still be able to switch light effects.Operating modesThe LokPilot 5 Fx micro DCC is a "thoroughbred" DCC decoder. 14 to 128 speed steps are as natural as 2 and 4-digit addresses. Up to 32 functions can be triggered. Thanks to

LokPilot 5 Fx micro DCC/MM/SX Function Decoder Next18The LokPilot 5 Fx micro and its "twin" LokPilot 5 Fx micro DCC are versatile function decoders with a Next18 interface on a footprint of 13.0mm x 9.2mm. They are used in all vehicles of the nominal sizes N to H0, which do not have a motor output, but should still be able to switch light effects.The LokPilot 5 Fx micro DCC is a "purebred" DCC decoder. 14 to 128 speed steps are as natural as 2 and 4 digit addresses. Up to 32 functions can be tri

Operation under DCC with RailComPlus®, M4, Motorola® and Selectrix®, 32 functions switchable (depending on the control panel), 32-bit processor, Digital Class "D" amplifier with up to 3 W power (LokSound 5 XL: 13 W), each channel in 16-bit resolution and 31250 kHz sample rate, noise memory with 128 Mbit capacity, motor control with 50 kHz clock speed, RC servos and Susi modules controllable, 3 new, individually adjustable brake controller, two-stage heavy load simulation, Updatable with ESU-LokP

Basic device MX10 + Roco WLAN mouse + USB stick + CAN cable + 8pola1m + power supply NG300 + router + 3x battery + operating instructions MX10

Miniature Rectangle Speaker with integrated resonant body, 11 x 15 x 9 mm, 8 ohm / 1 W.

Decoder MX637P22 with 22-pin PLUX22 interface NEM658, 22 x 15 x 3.5 mm, 1,2 A, 10 function outputs, no energy memory connection. Decoder MX637P22 with 22-pin PLUX22 interface NEM658, 22 x 15 x 3.5 mm, 1,2 A, 10 function outputs, no energy memory connection.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal

Light board LIPLDHW1 neutral white LED interior lighting with decoder and second address as an aid to train formation. This is typically set to the address of the locomotive in the light boards and function decoders of a train. This creates the possibility of switching the interior lighting of all these cars, as well as the exterior lights of the rear or control car, using the function keys of a single address (usually the locomotive address). In order to be able to use this comfortably, light c

Decoder MX635P22 with 22-pin PLUX22 interface NEM658, 26 x 15 x 3.5 mm, 1.8 A, 10 function outputs, power store connection 16V (arbitrary capacity, also gold cap), semi-synchronous rectifier for higher motor current and total load capacity (until 1.8 A).General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal st

Decoder MX616R with 8-pin interface NEM652 on wires, 8 x 8 x 2.2 mm, 24 V Voltage resistance, 0.7 A, 6 function outputs, no SUSI pins.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledg

Decoder MX638C with 21MTC interface NEM660, 26 x 15 x 3.5 mm, 1,2 A, 6 function outputs, FA3, FA4 as logic level outputs (changeable via CV # 8), no energy memory connection.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in oper

MN300F digital decoder 1.0A 6-pin interface NEM651 on wires. Variant of the MN300, 6-pin interface NEM651 on wires, 5 free wires.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same

PIKO SmartDecoder XP S Rh1067 PluX22 inkl. Lautsprecher

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just as small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price. LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of ??13.0mm x 9.2mm

Sound Decoder NEM 651 6-pin interface on wires, 19 x 11 x 3.1 mm, with 6 foot outputs, 13 connecting wires (2 x rail, 2 x motor, 2 x acc. Plus, mass, 4 FU outputs, 2 x speakers), 2 solder pads (other FU outputs).