Decoder MX635P16 with 16-pin PLUX16 interface NEM658, 26 x 15 x 3.5 mm, 1.8 A, 10 function outputs, power store connection 16V (arbitrary capacity, also gold cap), semi-synchronous rectifier for higher motor current and total load capacity (until 1.8 A).General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal st

Decoder MX636D with 21MTC interface NEM660, 26 x 15 x 3.5 mm, 1.8 A, 6 function outputs, energy storage connection also for 16 V ELKOS and gold caps, semi-synchronous rectifier for higher motor current and total load capacity (up to 1.8 A ).General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, program

Function Decoder, 10.5 x 8 x 2.2 mm, 0.7 A, 6 function outputs, 9 stranded wires.

Miniature sound decoder, 12 connection wires (2 x rail, 2 x motor, common plus, ground, 4 FA, 2 x speakers), 19 x 7.8 x 2.8 mm, audio 1 W, 0.7 A.

MN330P22 digital decoder 1.2A PluX-22. Direct connection of 15 V energy storage to PluX pin strip (unlimited capacity), no wires.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same

MN300P16 digital decoder 1.0A PluX-16. 6 FA Direct connection of 15 V energy storage device to PluX pin strip (up to 15,000 µF).Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same d

Permanent magnet like 235690 and 245480, for armature 231440, D = 19,1mm, for motor plate 231350 (drum collector motor). For the conversion of old Märklin® all-electric motors you need a permanent magnet. It replaces the previous field winding and helps your old locomotives in conjunction with a LokSound or LokPilot decoder to a driving behavior that you would never have expected the locomotives! In total, there are four different magnets, which is needed exactly depends on the anchor type. The

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all of the features, but the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility is rewarded with a lower price. LokPilot 5 decoders are offered with all common interfaces. Operating modes: The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®,

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color orange.

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all of the features, but the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility is rewarded with a lower price. LokPilot 5 decoders are offered with all common interfaces. Operating modes: The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®,

LokPilot 5 Fx DCC Funktionsdecoder PluX22 NEM658The LokPilot 5 Fx DCC is a function decoder without a motor output and therefore perfect for installation in control cars or function models. As the "twin brother" of the LokPilot 5 Fx, it shares its properties and also the basic properties of all other LokPilot 5 decoders, but is a pure DCC decoder. The LokPilot 5 Fx DCC is supplied in three versions: In addition to the "classic" version with an 8-pin NEM 652 cable harness, a version for the 21MTC

LokPilot 5 Fx function decoder DCC/MM/SX 8-pin NEM652The LokPilot 5 Fx is a function decoder without a motor output and is therefore perfect for installation in control cars or function models. Because it speaks DCC with RailCom® as well as Motorola® and Selectrix, it can be used with all common digital centers. It shares its flexible function key assignment and the various light effects with the other LokPilot 5 decoders from ESU.The LokPilot 5 Fx is supplied in three versions: In addition to t

The LokPilot 5 Fx micro and its “twin” LokPilot 5 Fx micro DCC is an extremely small function decoder with a footprint of only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm). It is used in all vehicles of nominal sizes N to H0 that do not have an engine output, but should still be able to switch light effects. LokPilot 5 Fx micro decoders are always offered with an 8-pin interface. Operating modes: The LokPilot 5 Fx micro is a real multi-protocol decoder. It masters the

Sound box for Doehler & Haass loudspeaker 1511, two versions in different heights.

The 380mm long, 15mm wide wagon interior lighting with the article number 50703 is intended for use in track-1 vehicles. It carries both white and yellow LEDs, which are separately adjustable in brightness. This allows you to set the desired color for the first time. The lighting board can be individually shortened and adapted to the length of the carriage. It comes with a red taillight. Thanks to the digital interface (21MTC), a function decoder can be retrofitted at any time.

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just as small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price. LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of ??13.0mm x 9.2mm

The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. Operating modes: The LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters al

The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions. LokPilot 5 micro decoders are o

The LokPilot 5 Fx micro and its “twin” LokPilot 5 Fx micro DCC is an extremely small function decoder with a footprint of only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm). It is used in all vehicles of nominal sizes N to H0 that do not have an engine output, but should still be able to switch light effects. LokPilot 5 Fx micro decoders are always offered with an 8-pin interface. Operating modes: The LokPilot 5 Fx DCC “only” speaks the DCC protocol, but can also be aut

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

The Mobile Control Pro is ESU's latest answer to the question of how to combine the advantages of smartphone technology with the needs of model railway control. The Mobile Control Pro is essentially a compact Android-based tablet equipped with controls for controlling your locomotives and magnetic accessories. The connection to the digital command station is established exclusively wirelessly via Wi-Fi. A specially designed app by ESU can communicate directly with a variety of digital command st

6-pin pin header NEM651 for converting to a F type

Function Decoder, 10.5 x 8 x 2.2 mm, 0.7 A, 6 function outputs, NEM651 6-pin pin header.

Miniature sound decoder, 6-pin interface NEM651 (2 x rail, 2 x motor, common plus, ground, 4 FA, 2 x speakers), 19 x 7.8 x 2.8 mm, audio 1 W, 0.7 A.