MN340C digital decoder 1.2A 21MTC. 8 FA FA3-FA6 preconfigured as logic level outputs (VHDM standard), connection for 15 V energy storage on solder pads (unlimited capacity).Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These simil

6-pin socket strip in grid 1.27 mm, as a mating plug for Decoder with 6-pin pin header (... n, ... f) to pluggle the Decoder in locomas without interface and thus easy to make interchangeable.

Sational Setup Module Stone in track sections equipment, i.: 8 Connections for track sections (up to 8 A, HLU, occupation message, etc.), 16 inputs (sensors, light barriers, contact tracks, ...). Included: approx. 2m 20pol ribbon cable incl. 1x 20pol Crimp plug, 4x 3pol plug Kl., 3pol plug Gr., 2pol plug, instructions adsfsdaf

Economy basic device Digital Center DCC

The LokSound 5 Fx is a special feature within the LokSound family: It has no motor output and is specially designed for use in control cars or power cars that require a sound but do not have a model drive themselves. By omitting the motor part, it can still offer all the sound features of the other LokSound 5 members on a size of only 21.5mm x 15.5mm.LokSound 5 Fx decoders are offered with an 8-pin interface according to NEM652 or a 21MTC interface and always come with an 11 x 15 mm "sugar cube"

This adapter board, measuring 54.0 mm x 17.0 mm, features an ESU PowerPack on board. Although the capacitors projecting at the front and rear result in a total length of 70 mm, this adapter board is ideal for converting many American H0 locomotives from Atlas or Athearn, where it replaces the original circuit board. In addition to connection pads for the motor and track, there are also pads for the function outputs AUX1, AUX2, AUX3, AUX4, AUX5, AUX6, AUX7, and AUX8. The series resistors for the

With this expansion board you can elegantly extend your LokPilot V4.0 or LokSound V4.0 decoder (with 21MTC interface!): Simply plug the decoder onto the device and use 8 additional function outputs (AUX3 to AUX10) for lighting effects, coupling etc. You can also connect 4 RC servos. The necessary 5V voltage is also provided. The highlight of the module is the control electronics for clocked smoke generators: Simply install an ESU smoke generator (from the BR 215) in your locomotive and let it ge

Sound box for Doehler & Haass loudspeaker 1308, two versions in different heights.

Sound Decoder, NEXT18 interface NEM 662, 15 x 9.5 x 3.3 mm, audio 1 W, 0.7 A.

ELKOS for Decoders of Category 2 (ie with direct energy storage connection), 15 V variant, usually several elkos are connected in parallel: at least 3 recommended, with MX Decoders up to 10 - results in maximum capacity of 6800 ?F, at MS Decoders unlimited).Content: 20 x ELKO 2200 ?F / 16 V, 10 x 20 mm (change to ELKOS with higher energy density when availability possible).

Detailed description of the Märklin digital system. In this book you will find all the essential information about Central Station 3 with software version 2.5: including digital control with Central Station 3, converting to digital driving, tips for automated processes, and designing track plans. Scope of over 220 pages in Din A4 format. Version in German.

Hardware: H4 booster with 7.0 A continuous output power.Output protected against overload and short circuit.Thermal overload protection.Galvanic isolation of track exit and EcoSlink bus.NMRA DCC RailCom® feedback integrated.M4 feedback device integrated.Operating modes: Use with ESU ECoS or Märklin® central station® 60212. Supported data formats (depending on the control panel): NMRA DCC, Motorola®, Selectrix®, M4.Dimensions in mm: 180 x 76 x 40 mm.Scope of delivery: ECoSBoost with 7.0A output p

Digital for beginners, Part 2 - German

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all of the features, but the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility is rewarded with a lower price. LokPilot 5 decoders are offered with all common interfaces. Operating modes: The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®,

LokPilot 5 Fx function decoder DCC/MM/SX 21MTC NEM660The LokPilot 5 Fx is a function decoder without a motor output and is therefore perfect for installation in control cars or function models. Because it speaks DCC with RailCom® as well as Motorola® and Selectrix, it can be used with all common digital centers. It shares its flexible function key assignment and the various light effects with the other LokPilot 5 decoders from ESU.The LokPilot 5 Fx is supplied in three versions: In addition to t

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just as small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price. LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of ??13.0mm x 9.2mm

This new "sugar cube" speaker, measuring 13mm x 18mm, is larger than the previous ESU speaker. Since the diaphragm is a good 40% larger, it can deliver significantly higher sound pressure. Both bass and mid-range and high-frequency reproduction are flawless. This speaker can be used anywhere our bass reflex speakers don't fit, but where the best possible bass reproduction is still important. The same principle applies to our new speaker: the larger the enclosure, the better the sound. We include

For difficult installation situations with limited space, particularly in N-gauge models, we recommend our miniature speaker, which requires only 10 mm x 12 mm of space. This speaker was selected by our audio engineers after extensive testing because it offers a good compromise between acceptable bass reproduction and volume. This miniature produces astonishingly high sound pressure levels – when combined with the appropriate sound capsule. The set includes four sound capsules of different heigh

This speaker module offers extremely good performance in a modest size. With the help of the built-in passive radiator in combination with a high-performance rectangular speaker, the module achieves high-quality bass reproduction and considerable sound pressure even in the highs and mids. It was developed as a replacement for the factory-installed speakers specifically for American Scaletrains (SXT) diesel locomotives: It fits without any modification to the locomotive. The speaker is a perfect

16-POL SMD pin header (as it is mounted on Plux Decoders as a plug)

Sound Decoder with a 652 8-pin interface with plug, 30 x 15 x 4 mm, 13 connecting wires (2 x rail, 2 x motor, acc. Plus, mass, Elko Plus, 4 FU outputs, 2 x speakers), 6 Solder pads (other FU outputs).

Round speaker 23 mm, preferably to use in locomas provided for the installation of such a loudspeaker, so integrate the resonance body in the locomotive housing, 8 ohms / 0.5 W.

16-pin bridge plug

Basic device MX10 + Fahrer MX33 + USB stick + CAN cable + 8Pola1m + power supply NG300 + operating instructions (MX10, MX33)