Assortment of components, for the construction of low-cost energy storage circuits for about 20 Decoders without precabilities for direct connection. Content: see www.zimo.at, Decoder, energy storage

Servo Decoder, 105 x 50 x 15 mm, 3.0 A. 8 complete servo connections, ie 3-pole (5V or 6V supply, mass, control line). Supply directly from the rail (energy and DCC data) and / or from an auxiliary supply (so that switch switches is possible even after a short circuit); Railcom for position feedback and CV reading.

Accessories Decoder, 19 x 11x 3 mm, without normal switch outputs, 16 outputs for lights (LEDs), e.g. eight 2-term signals or four with 4 lights.

Double-turn Decoder, 19 x 11 x 3.5 mm, 0.8 A (tip 2.5 A), for 2 double coils, motor or EPL drives, 4 inputs for position feedback or forced circuit, 16 outputs ( Open Collector 100 mA) on solder pads for lamps (LEDs), eg eight 2-term signals or four with 4 lights, 8 connecting wires.The accessory Decoders of the MX820 family are switched to switching and feedback from soft, light and shape signals, magnetic decouplers, etc. Used. The small size allows installation into the track bedding of or in

Severweight Decoder, 19 x 11 x 2 mm, 0.8 A (tip 2.5), additionally 8 outputs (open-collector 100 mA) on solder pads for lights (LEDs), eg four 2-term signals or two With 4 lights, 5-port wires.The accessory Decoders of the MX820 family are switched to switching and feedback from soft, light and shape signals, magnetic decouplers, etc. Used. The small size allows installation into the track bedding of or in drive housing, for example from LGB turns. All drive types for soft and shape signals are

Plug set for MX697S or replacement plug set for MX697V

Function Decoder, 26 x 15 x 3.5 mm, 1.8 A, 8 function outputs, energy storage terminal, variable low voltage output, with 21MTC interface NEM660.

Sound Decoder MX660, 42 x 9 x 2.4 mm, 0.8 A, audio 1 W, 6 function outputs, particularly flat design without connection wires for self-wiring.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to ac

Sound Decoder MX659N18 with NEXT18 interface NEM662, 20 x 9.5 x 4 mm, 0.7 A, audio 1 W, 4 function outputs.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered driv

Sound Decoder MX658N18 with NEXT18 interface NEM662, 25 x 10.5 x 4 mm, 0.8 A, audio 1 W, 4 function outputs.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered dri

Decoder MX636CV with 21MTC interface NEM660, 26 x 15 x 3.5 mm, 1.8 A, 6 function outputs, energy storage connection also for 16V ELKOS and gold caps, semi-synchronous rectifier for higher motor current and total load capacity (up to 1.8 A ), Low voltage source for function outputs (1.5V).General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) dri

Decoder MX635V with 8-pin interface NEM652 on wires, 26 x 15 x 3.5 mm, 1.8 A, 10 function outputs, connection for energy storage 16V (arbitrary capacity, also gold cap), semi-synchronous rectifier for higher motor current and total load capacity ( to 1.8 A), low voltage source for function outputs (1.5V).General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 1

Decoder MX633R with 8-pin interface NEM652 on wires, 22 x 15 x 3.5 mm, 1.2 A, 10 function outputs, with SUSI, with larger EEPROM memory for up to 1024 CV's, connection for energy storage 16V (arbitrary capacity, too Goldcap).General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in

Test and connection board for MS Decoder MS950 MS955 MS990

Miniature Sound Decoder, NEM 651 6-pin interface angled, 19 x 8.6 x 2.9 mm, audio 1 W, 0.7 A, 4 FU. Direct connection Energy storage 15 V (up to 1000 ?F, or up to 3000 ?F, if no service mode and SW update / sound loading), 4 connecting wires (because there are no pins for 6-pin. Interface No Pins: Gem.Plus, Mass, 2 x speakers), 4 solder pads (2 fu, 2 susi, logic.).

Miniature Sound Decoder, 19 x 8.6 x 2.9 mm, Audio 1 W, 0.7 A.

Sound Decoder NEM 658 16-pole PLUX16, 19 x 11 x 3.1 mm, with 6 foot outputs, 13 connecting wires (2 x rail, 2 x motor, 2 x acc. Plus, mass, 4 foot outputs, 2 x Speaker), 2 solder pads (other FU outputs).

MN140E24 digital decoder 0.7A Interface E24.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same driving behavior, the same mapping, the same script capabilities and a similar projec

V-based, or the self-building of mini-gold modules, or with Stayalive controllers, e.g. Staco1.Content: Mini-Gold Cap 0.3 F / 2.7 V, 4 x 12 mm (diameter x length).

Miniature Gold Caps (0.3 f) for Decoder MS580N18 as an extension of the internal energy storage to 150,000 ?F on 5 finished module made of 6 in series-connected mini gold caps in block form (2 threesome rows one above the other) for MS Decoders of the Category 2 (ie with direct energy storage connection), 15 V variant, eg MS450, MS440.Not allowed for MX Decoder because charging transistor is not sufficiently powerful.Content: 5 x Mgoblock Mini-Gold Cap Module 50,000 ?F / 16 V, 14.6 x 7.8 x 14 mm

Broadband loudspeaker, 90 x 50 x 35 mm, 130-20 kHz, 8 ohms, 10 W (nominal load capacity).

Broadband speaker, 90 x 40 x 14 mm, 120-20 kHz, 8 ohms, 4 W (nominal load capacity), wood membrane.

Broadband speaker 6 cm, low installation depth (2 cm), waterproof, 170 Hz - 15 kHz, 8 ohm / 3 W.

Broadband speaker 5 cm, low installation depth (2 cm), waterproof, 170 Hz - 17 kHz 8 ohm / 3 W.