Broadband speaker 5 cm, 150 Hz - 10 kHz, 8 ohm / 4 W, low installation depth (21 mm), without tabs.

Broadband speaker 5 cm, 200 Hz - 20 kHz, 8 ohm / 4 W (nominal load bark.), Low installation depth (23 mm).

Broadband speaker 8 cm, 100 Hz - 20 kHz, 4 ohm / 30 W (nominal load capacity).

Broadband speaker 7 cm, 200 Hz - 20 kHz, 8 ohm / 8 W (nominal load capacity).

Broadband speaker 5 cm, 150 Hz - 20 kHz, 8 ohms / 5 W (nominal load capacity), installation depth 31.5 mm.

Miniature Rectangle Speaker with integrated resonant body, 8 x 12 x 8 mm, 8 ohm / 0.5 W.

Rectangular speaker 25 x 15 mm, without resonant body, 8 ohm / 1 W.

Dumbo with integrated resonance body, 18 x 13 x 8 mm, 8 ohm / 1 W.

Light board LIPLDHW1 yellow LED interior lighting with decoder and second address as an aid to train formation. This is typically set to the address of the locomotive in the light boards and function decoders of a train. This creates the possibility of switching the interior lighting of all these cars, as well as the exterior lights of the rear or control car, using the function keys of a single address (usually the locomotive address). In order to be able to use this comfortably, light circuit

Connection board at the I2C bus for 16 signal lights, with solder pads.

Gold Caps (1 F) for self-assembly of gold cap modules, consisting of 6 or 7 in series-connected gold caps as energy storage (stronger than with mini-gold caps) for MS Decoder of Category 2.20 x Goldcap 1 F / 2.7 V, 8 x 12 mm (diameter x length).

Digitally switchable coupling for single tractions. Matching counterparts: Roco universal coupling or MK. The non-height-adjustable couplings are suitable for all cars with a standard shaft according to NEM 362. The height-adjustable clutches only need if the car has no standard shaft but a NEM 363 coupling recording.Technical data: voltage: 12-22V DC, maximum current: 90mA, maximum load duration: 10 seconds, bobbin: brass, mechanics: permanent magnet, clutch recording: NEM 362 / NEM 363, buffer

Crimp tool for the ZIMO Crimp socket strips.

25 Crimp socket strips Criovs14 + Crimp tool

25 Crimp socket strips Criovs12 + Crimp tool

14-pin socket strip with crimp connections (also solderable) for AWG22 strands for plugging in large-scale Decoder in pinboard version.

12-pin socket strip with crimp connections (also solderable) for AWG22 strands for plugging in large-scale Decoder in pinboard design.

10-pole tape cable plug for MX696S

20-pole tape cable plug for MX696 series

Adapter board for US models (Athearn, Kato, U.V.A ..), for PLUX16 and PLUX22 Decoders. The Decoder is plugged into the socket bar of the adapter. About large solder pads the wiring within the locomotive CAN be made comfortable.These embodiments of the adapter board includes voltage regulators for a functional low voltage of 5 V. With the aid of the 5 V voltage, for example, servos CAN be operated.The Adapus adapter board CAN be used with Decoders equipped with 16 V energy storage connection. Not

Adapter board for US models (Athearn, Kato, U.V.A ..), for PLUX16 and PLUX22 Decoders. The Decoder is plugged into the socket bar of the adapter. About large solder pads the wiring within the locomotive CAN be made comfortable.These versions of the adapter board contains voltage regulators for a functional low voltage of 1.5 V.The Adapus adapter board CAN be used with Decoders equipped with 16 V energy storage connection. Not allowed is the use of adapus together with MX630P16 and MX648P16!

This design of the adapter board contains voltage regulators for a functional low voltage of 5 V. With the aid of the 5 V voltage, for example, servos CAN be operated.Adapter board for PLUX22 Decoder, the Decoder is plugged into the socket strip of the adapter. About large solder pads, the wiring within the locomotive CAN be made comfortably, whereby the connections (plus lines) common for a variety of devices (plus lines) are multiply. The AdapLu adapter board is equipped with a rectifier that

This design of the adapter board contains voltage regulators for a functional stress of 1.5 V.Adapter board for PLUX22 Decoder, the Decoder is plugged into the socket strip of the adapter. About large solder pads, the wiring within the locomotive CAN be made comfortably, whereby the connections (plus lines) common for a variety of devices (plus lines) are multiply. The AdapLu adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and o

This design of the adapter board contains voltage regulators for a functional stress of 5 V.Adapter board for 21MTC Decoder, the Decoder is plugged into the pin header of the adapter, as AdamtC only with screw terminals. Size: 44 x 26.5 x 6 mm. The adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and CAN deliver more power for it.The adapter board CAN be used along with all 21MTC Decoders which are a C-type - therefore MX631C, MX