Loco Jumper Plug PluX

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

Doehler & Haass N18-G-3 connection adapter Next18 large with 11 connection wires length approx. 145 mm.Dimensions [mm] 14.3 * 10.2 * 2.0

A new Doehler & Haass decoder developed exclusively for Modellbahn Union / DM-Toys. As with all comparable Doehler & Haass decoders, the driving characteristics of this decoder are at an excellent level. Two small capacitors are installed on the decoder for driving without data loss. Both the software and the chip itself correspond to the same modern technology as the latest decoders from Doehler & Haass. The decoder, produced in Germany, can be used for both normal DC motors and coreless motors

Ideal to illuminate the kibri cube house Anna made of polyplate. Contains 4 warm white LEDs, 1 diode, 1 resistor and additionally 20 cm each brown and yellow cable. For connection to the LED dimmer from Viessmann.

Lenz 10318-01 Lokdecoder Silver+ Next18

GER: PSD S Ae 4/7 BBC PluX22+LS

Loudspeaker PIKO SmartDecoder

Z21 pro LINK

Decoder, without wires, 0.5A.

Vehicle decoder DH10C-0 2nd generation for SX1, SX2, DCC and MM without connecting wires.Operating mode SX1, SX2, DCC, MM, DC-analogDimensions [mm] 12.7 * 8.9 * 1.4Total load 1.5 AMax. Motor current 1.5 AMax. Driving voltage 30 VFunction outputs light: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 300 mA eachFunction outputs: AUX5, AUX6 unamplified *)With SUSI interface (if AUX5 / AUX6 deactivated)*) Unamplified function outputs AUX3

Doehler & Haass SB1308 sound box small, suitable for the speakers LS1308 & LS1308S.

Vehicle decoder DH10C 2nd generation for SX1, SX2, DCC and MM with connection cable for NEM 651.Operating mode SX1, SX2, DCC, MM, DC-analogDimensions [mm] 12.7 * 8.9 * 1.4Total load 1.5 AMax. Motor current 1.5 AMax. Driving voltage 30 VFunction outputs light: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 300 mA eachFunction outputs: AUX5, AUX6 unamplified *)With SUSI interface (if AUX5 / AUX6 deactivated)*) Unamplified function outpu

Decoder Tester

Doehler & Haass DH21B-4 vehicle decoder mtc21 interfaceOperating mode SX1, SX2, DCC, MM, DC analog, AC analogDimensions [mm] (under reserve) 20.7 * 15.8 * 5.2Total load capacity 2.0 AMax motor current 2.0AMax. driving voltage 30 VSwitching voltage with AC-analogue max. 45 V peak = 30 V rms.LV, LR (dimmable) each 150 mAAUX1, AUX2 (dimmable) each 300 mAAUX3, AUX4 each 1.0AAUX5, AUX6, AUX7, AUX8 unamplifiedwith SUSI interfaceProduct features and functionsFor optional operation with a conventional D

Z21 digital control centre

For retrofitting locomotives with integrated PluX22 interface. With 22-pin interface according to NEM 658. märklin SoundDecoder3 supports the digital formats mfx, MM1, MM2, DCC, and RailCom. The sound of a diesel locomotive is pre-programmed. A Märklin decoder tester is required for programming.

Vehicle decoder DH10C 2nd generation for SX1, SX2, DCC and MM with 6 connection wires, length approx. 145 mm.Operating mode SX1, SX2, DCC, MM, DC-analogDimensions [mm] 12.7 * 8.9 * 1.4Total load 1.5 AMax. Motor current 1.5 AMax. Driving voltage 30 VFunction outputs light: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 300 mA eachFunction outputs: AUX5, AUX6 unamplified *)With SUSI interface (if AUX5 / AUX6 deactivated)*) Unamplified f

Mobile Station

Sound Kit for TRAXX

Universal usage. Powerful and quiet drive unit in flat design with slowly swinging drive plate, ideal for the opening and closing of doors. The included decoder is integrated as component inside the cable which makes the drive extra compact. It recognizes Märklin-Motorola and DCC format and is able to feedback required theoretical and actual position by RailCom to appropriate digital command station, e.g. Viessmann Commander item 5320. End position, speed and motion characteristics are configura

Doehler & Haass DH22B-3 vehicle decoder with pigtailsOperating mode SX1, SX2, DCC, MM, DC analog, AC analogDimensions [mm] (under reserve) 20.7 * 15.8 * 5.2Total load capacity 2.0 AMax motor current 2.0AMax. driving voltage 30 VSwitching voltage with AC-analogue max. 45 V peak = 30 V rms.LV, LR (dimmable) each 150 mAAUX1, AUX2 (dimmable) each 300 mAAUX3, AUX4 each 1.0AAUX5, AUX6 each 1.0AAUX7 1.0AAUX8 unamplifiedwith SUSI interfaceProduct features and functionsFor optional operation with a conve

Vehicle function decoder FH16A for SX1, SX2, DCC and MM. For optional operation with conventional DC controller, digital systems according to SelecTRIX 1 and 2 or according to DCC format. Switching between analogue and digital operation takes place automatically. In digital mode, the last programmed system is used (it is not switched over automatically!).SelecTRIX 1 31 speed steps, 100 addressesSelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functionsDCC Short addresses (1-127), lon

Loudspeaker PIKO ICE4