6-pin plug decoder (MX630N)

Model: HO gauge. Loudspeaker for retrofitting Car System conversion vehicles in conjunction with the analog-digital conversion kit.

The memory circuit SP16A can be connected to many decoders (not only decoders from D&H) and improves operation even on dirty track sections or routes with unpolarized frogs.The memory circuit SP16A can be operated with all vehicle decoders that have connection options for supply voltage and ground. It can be used for all data formats that the vehicle decoder supports.Little space requirement and particularly low overall heightThanks to the integrated inductance, it is compatible with asymmetrica

Energy storage device SP05A-2 for SUSI with connection cable for SUSI and with shrink tubingEnergy storage for SUSIDimensions [mm] (with shrink tube) 28.5 * 9.5 * 12.0Stored energy 7.29 WsCapacitor voltage 5.4 VCapacitance 0.5 FBuffer voltage 10.5 VMax. Driving voltage 30 VProduct features and functionsOperation on all locomotive / vehicle decoders with a standard SUSI interfaceAdjustable start of the charging process either according to time or on arrivalAdjustable maximum buffer time so that d

Decoder with wires, 1A.

PD12A-0 vehicle decoder DCC without connection cable, without connector.Operating mode DCC, DC analogDimensions [mm] 24.2 * 11.0 * 2.4Total load capacity 1.0 AMax motor current 1.0AMax. driving voltage 30 V2 light outputs, each dimmable 150 mA2 additional outputs, dimmable 300 mA eachFor optional operation with a conventional direct current driving device or according to the NMRA standard (DCC)Switching between analog and digital operation is automaticDCC Short addresses (1-127), long addresses

A new Doehler & Haass decoder developed exclusively for Modellbahn Union. Two small capacitors are installed on the decoder for driving without data loss. Both the software and the chip itself correspond to the same modern technology as the latest decoders from Doehler & Haass. The decoder, produced in Germany, can be used for both normal DC motors and coreless motors. Switching from analogue to digital operation takes place automatically.The vehicle decoders support braking with asymmetrical di

Doehler & Haass N18-G-2 connection adapter Next18 large with connection cable NEM 652 and with 2 connection strands, length approx. 145 mm.Dimensions [mm] 14.3 * 10.2 * 2.0

Doehler & Haass M21-3 Connection adapter 21-pin interface with 11 connection wires, length approx. 145 mm.Dimensions [mm] (without pins) 15.0 * 16.0 * 0.6Dimensions [mm] (with pins) 15.0 * 16.0 * 6.7

Dimensions [mm] 14.0 * 12.0 * 5.5, impedance 8 ohms, max. power 0.8 W, no sound box required.Installation recommendations:In general, the recommendation is to install the loudspeakers far away from the engine in order to:to avoid inadmissible heating of the loudspeakers andto protect the loudspeaker magnets from demagnetization by the sometimes very strong motor magnets (e.g. Roco).Please note the installation recommendations for the LS1308 speaker:One side of the speaker is the membrane (silver

Dimensions [mm] 15 * 11 * 4.1, impedance 6 ohms, max. power 1.2 W.Installation recommendations:In general, the recommendation is to install the loudspeakers far away from the engine in order to:to avoid inadmissible heating of the loudspeakers and to protect the loudspeaker magnets from demagnetization by the sometimes very strong motor magnets (e.g. Roco).Please note our installation recommendations for the loudspeaker LS1115 or LS1511:One side of the speaker is the membrane (silver finish) sur

Dimensions [mm] 15 * 11 * 3.5, impedance 6 ohms, max. power 1.2 W.Installation recommendations:In general, the recommendation is to install the loudspeakers far away from the engine in order to:to avoid inadmissible heating of the loudspeakers and to protect the loudspeaker magnets from demagnetization by the sometimes very strong motor magnets (e.g. Roco).Please note our installation recommendations for the loudspeaker LS1115 or LS1511:One side of the speaker is the membrane (silver finish) sur

Dimensions [mm] 13 * 8.0 * 2.9, impedance 6 ohms, max. power 1.0 W.Installation recommendations:In general, the recommendation is to install the loudspeakers far away from the engine in order to:to avoid inadmissible heating of the loudspeakers and to protect the loudspeaker magnets from demagnetization by the sometimes very strong motor magnets (e.g. Roco).

Doehler & Haass DH22B-2 Vehicle decoder with ribbon cable NEM 652Operating mode SX1, SX2, DCC, MM, DC analog, AC analogDimensions [mm] (under reserve) 20.7 * 15.8 * 5.2Total load capacity 2.0 AMax motor current 2.0AMax. driving voltage 30 VSwitching voltage with AC-analogue max. 45 V peak = 30 V rms.LV, LR (dimmable) each 150 mAAUX1, AUX2 (dimmable) each 300 mAAUX3, AUX4 each 1.0AAUX5, AUX6 each 1.0AAUX7 1.0AAUX8 unamplifiedwith SUSI interfaceProduct features and functionsFor optional operation

Doehler & Haass DH22B-4 vehicle decoder without connection cableOperating mode SX1, SX2, DCC, MM, DC analog, AC analogDimensions [mm] (under reserve) 20.7 * 15.8 * 5.2Total load capacity 2.0 AMax motor current 2.0AMax. driving voltage 30 VSwitching voltage with AC-analogue max. 45 V peak = 30 V rms.LV, LR (dimmable) each 150 mAAUX1, AUX2 (dimmable) each 300 mAAUX3, AUX4 each 1.0AAUX5, AUX6 each 1.0AAUX7 1.0AAUX8 unamplifiedwith SUSI interfaceProduct features and functionsFor optional operation w

Decoder with cable, 1.5A.

Vehicle decoder 1.5 A (2nd generation) for the 6-pole interface. Strongly reduced dimensions, higher total load capacity and higher motor current (1.5 A), AUX3 and AUX4 as amplified function outputs (1.0 A), AUX5 and AUX6 as unamplified function outputs (alternative to SUSI interface), about five times buffer capacity (therefore longer contact interferences can be passed without data loss). Operating mode SX1, SX2, DCC, MM, DC-analog, total load 1.5 A, maximum motor current 1.5, maximum driving

Cable for connecting SX components, length 2.0 m.

USB cable A / B, length 180 cm.

DCC operation, Motorola® operation, M4 operation (mfx® compatible), Selectrix® operation, DC analog operation, AC analog operation, DCC programming, 6021 programming, Mobile / Central Station®, M4 programming and automatic logon, RailCom® with RailComPlus®, ABC-, Selectrix®, Märklin®, HLU brake lines, ABC shuttle train, connection possibility for PowerPack, 32 functions switchable (depending on the control panel), updatable with ESU-LokProgrammer. LokSound 5 Soundengine: 10 channels. 16 bit HiFi

Operating modes: Direct bus connection to ECoSlink. Operation with ECoS or Central Station "Reloaded" possible. Feedback: 4 feedback sensors permanently configured as track occupation indicator (current sensor). Galvanic Trennug the feedback from the central office. RailCom®: 4 sensors configured as RailCom feedback ("local detector"). Detection of the locomotive address. Dimensions: 86mm x 86mm x 25mm. Scope of delivery: ECoSDetector RC feedback module, connection terminals, ECoSlink bus connec

Universal usage. Multifunctional light decoder with numerous options yet easy handling. The functions can be configured with DIP-switches. More advanced options can be activated digitally via CV-programming. 4 groups, each with 8 current protected outputs can be switched individually, or configured as various lighting scenarios. Flicker-free LED lighting and various effects provide numerous possibilities on your layout. For each of the 4 groups, you can select from more than 20 different effects

Universal usage. Fits to e.g. soldiers item 1530, 1531 and 1532.

Universal usage. Handicraft set. Universally applicable LEDs. No soldering of cables is required. Including resistor and diode.Dimensions: L 1,6 mm x W 0,8 mm.