The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions. LokPilot 5 micro decoders are o

The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions. LokPilot 5 micro decoders are o

The new ESU PowerPack Mini can be optionally connected to all ESU decoders of the fourth generation (ie: LokPilot V4.0, LokPilot micro V4.0, LokSound Fx V4.0, LokSound V4.0, LokSound micro V4.0 or LokSound V4.0 M4) and fifth generation (LokSound 5 and LokSound 5 micro) are connected and provides your locomotive with reliable energy when driving over dirt and long routes. Its energy storage (with 1 Farad capacity) will buffer both the noise and light and engine functions, allowing your models to

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color brown.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color black.

Lokliege, maintenance couch 33cm made of special foam, for N, TT and H0, with magnetic strip for small parts fixing, can be arranged in rows.The ESU Premium Lokliege is the ideal tool for the maintenance and care of your locomotives. Two recesses are available for perfect work: The locomotive can be clamped upside down to comfortably reach the underbody of the locomotive. In the classic inclined tray, you can easily reach the side walls of the locomotive or set up the locomotive almost verticall

Central Station 3 plus

ELKOS for Decoders of Category 2 (with direct energy storage connection), 25 V variant (ie MX Decoder with 21MTX interface). Usually several elkos are connected in parallel: at least 3 recommended, at MX Decoders a maximum of 10 - for the permissible total capacity of 6800 ?F, in MS Decoders unlimited number).Contents: 50 x ELKO 680 ?F / 25 V, 10 x 20 mm (change to ELKOS with higher energy density for availability possible).

Digital for beginners, Part 3 - German

Stationary setup module Stein in full equipment, ie: 8 connections for track sections (up to 8 A, HLU, occupation message, etc.), 8 connections for switching drives (double coils, motors) or 16 individual outputs, 16 inputs (div. Sensors, light barriers , Contact tracks, ...), 1 I²C bus, 2 speaker outputs, 2 slots for expansion boards. Included: approx. 2m 20pol ribbon cable incl. 2x 20pol Crimp plug, 4pol plug, 4x 3pol plug Kl., 3pol connector Gr., 2pol plug, instructions.

Basic device MX10 + Fahrer MX33FU + USB stick + CAN cable + 8pola1m + power supply NG600 + operating instructions (MX10, MX33)

8-pin connector board NEM652 for converting to a R-type

Decoder MX635VP with 22-pin PLUX22 interface NEM658, 26 x 15 x 3.5 mm, 1.8 A, 10 function outputs, connection for energy storage 16V (arbitrary capacity, also gold cap), semi-synchronous rectifier for higher motor current and total load capacity (until 1.8a), low voltage source for function outputs (1.5V).General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or

22-pin (2 x 11) female strip in raster 1.27 mm, as a mating plug for Decoder with 22-pin or 16-pin PLUX pin strip to pluggle the Decoder in locomas without interface and thus simply make interchangeable. Suitable e.g. For Decoder, which are intended for locomotives with built-in Plux plugs.

Sound Decoder with NEM 658 22-pin PLUX22 interface, 30 x 15 x 4 mm, audio 3 W (4 ohms), 13 Connection wires (2 x rail, 2 x motor, acc. Plus, mass, Elko Plus, 4 FU outputs , 2 x speakers), 6 solder pads (other FU outputs), direct connection energy storage 15 V (unlimited capacity) on Plux pin strip.

The IR scanner is a locally deployed sensor unit for capturing vehicle-related information at defined points along the route. While driving, it records relevant vehicle data in real time and makes this information immediately available to the traffic infrastructure. This enables situation-dependent control of lanes, access points, and special zones – precise, automated, and efficient. Continuous data acquisition allows for the targeted differentiation of traffic flows.For example, short vehicles

The InductiveCharger enables wireless recharging of vehicles as well as inductive communication with the vehicle. It is comparable to the IR Traffic smart Art. 8405, but without its infrared reading function. Vehicles stop on the module and position themselves automatically over the charging coil, whereby charging currents are automatically adjusted.These modules are particularly suitable for locations with longer stopping times such as traffic lights, railway crossings or petrol stations. Sever

The module allows a variety of commands to be transmitted to the CarMotion vehicles via infrared signal. From simply flashing to braking and stopping CarMotion vehicles, e.g. B. in front of traffic lights. The two infrared transmitting diodes can be placed inconspicuously next to the road, but also lying in a small section in the road or in the shoulder. Like the vehicles, the module can be conveniently configured in the CarManager. All macros that are stored in the vehicles can be called up by

4-pin connection cables between Decoder and SUSI module (also for Mxulfa)

1 x StayAlive controller STACO3A (10x7.3x2mm) for decoders without or with limited provisions for direct energy storage connection. 2 miniature gold caps (solder bridge) can be connected via the two free wires via STACO3A. Suitable for N & TT frame models only.Scope of delivery: 1x STACO3A and 2x mini gold caps, 0.3F/2.7V, 4x12mm.

Zimo USB stick, as well as the delivery of the MXulf, as a substitute stick

Double-turn Decoder, 19 x 11 x 3.5 mm, 0.8 A (tip 2.5 A), for 2 double coils, motor or EPL drives, 4 inputs for position feedback or foreclosure, 8 connection wires.The accessory Decoders of the MX820 family are switched to switching and feedback from soft, light and shape signals, magnetic decouplers, etc. Used. The small size allows installation into the track bedding of or in drive housing, for example from LGB turns. All drive types for soft and shape signals are supported by double coils, m

Function Decoder, 20 x 11 x 3.5 mm, 1.0 A, 8 function outputs, with 8-pin interface NEM652 on wires.

GER: LED-Beleuchtungsbausatz Innenbeleuchtung für WRm 61