The Zimo Digital Centers: No big boxes, but state-of-the-art technology:At first glance, the very small dimensions (depending on the type 18 and 15 cm wide, 3 cm high) fall on, as well as the absence of heat sink and fans. Thanks to state-of-the-art Leistungslelektronik - five high-frequency switching regulators for rail outputs and auxiliary voltages - the device running despite 20 A (MX10EC: 12 A) on the rail and 5 A on the bus not hotbut the ZIMO system takes the same consideration for applic

DCC operation, Motorola® operation, M4 operation (mfx® compatible), Selectrix® operation, DC analog operation, AC analog operation, DCC programming, 6021 programming, Mobile / Central Station®, M4 programming and automatic logon, RailCom® with RailComPlus®, ABC-, Selectrix®, Märklin®, HLU brake lines, ABC shuttle train, connection possibility for PowerPack, 32 functions switchable (depending on the control panel), updatable with ESU-LokProgrammer. LokSound 5 Soundengine: 10 channels. 16 bit HiFi

Decoder ELNA Next18.

Decoder Next18 according to NEM662.

Decoder Next18 nach NEM662

Cable set with 8-pin socket to NEM 652, DCC cable colors, 300mm length. If the locomotive to be converted does not have a digital interface, but you do not want to cut off the interface connector of the decoder, our cable sets 51950 or 51951 will help you: First install a suitable cable harness and then simply plug in the decoder. How to digitize the pros!

The steam smoke distillate produces a realistic dense, white vapor and evaporates residue-free, without the usual traces in the smoke generator, on locomotives, building roofs or plant surfaces. It is also easy to wipe off with alcohol and will not affect the finish or aging of your models.

LokSound 5 Nano empty decoderWith the LokSound 5 Nano DCC, ESU has succeeded in developing yet another significantly smaller LokSound decoder: At only 19.6 mm x 8.5 mm x 3.2 mm, it is the smallest LokSound decoder we have ever built. Thus, it should really find its use in all vehicles of the nominal sizes N and TT. The LokSound 5 Nano DCC decoder is a pure DCC decoder with open wire ends for free wiring and comes with an 11 x 15 mm "sugar cube" speaker along with a sound capsule kit.The LokPilot

The professional test bench is simply connected to your digital central unit or the LokProgrammer. In addition to a 6-pin NEM 651 interface and an 8-pin NEM 652 interface, there is also a 21MTC NEM660 interface, a PluX22 socket and the Next18 interface. Locomotives without interface connectors can be contacted with single cable clamps. A high-quality bell armature motor with flywheel used in conjunction with direction LEDs to control the engine output. An LED monitor informs you about the functi

This adapter board provides the appropriate connection of the LokSound L decoder. The decoder is plugged directly into the female connectors. On the output side, the adapter board provides soldering points for all functions of the decoder. The adapter board can be fixed with screws in the model.

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

Servo Decoder, 105 x 50 x 15 mm, 3.0 A. for 8 servos (8x 3pol plug incl. 5-6V supply), 16 inputs (position contacts, foreclosure) and 16 outputs (signal lights, polarization relay); Additionally included: 2x plug (2pol plug-k), 1m 20pol ribbon cable, 2x 20pol cutting bracket.

Decoder MX636C with 21MTC interface NEM660, 26 x 15 x 3.5 mm, 1.8 A, 6 function outputs, energy storage connection also for 16 V ELKOS and gold caps, semi-synchronous rectifier for higher motor current and total load capacity (up to 1.8 A ), FA3, FA4 as logic level outputs.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256

Decoder MX617F with 6-pin plug NEM651 interface, 13 x 9 x 2.5 mm, 24 V Voltage resistance, 0.7 A, 6 function outputs, no SUSI pins.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge a

Miniature sound decoder, E24 interface, not mfx capable, 19 x 8.7 x 2.8 mm, audio 1 W, 0.8 A.

Sound Decoder, 6-pin interface NEM 651, 14 x 10 x 2.6 mm, audio 1 W, 0.7 A, with 4 FU outputs.

MN170R digital decoder 0.7A 8-pin interface NEM652 on wires. Variant of the MN170, 8-pin interface NEM652 on wires.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same driving behavi

MN170 digital decoder 0.7A 10 stranded wires. Wired variant of the MN170, 9 connection wires (2x rail, 2x motor, Gem. Plus, 4x FA) 5 solder pads (2x FA, 2x SUSI, ground).Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similari

Prefabricated module made of 7 in series-connected gold caps in round shape for Decoder of Category 2 (for MS Decoders such as MS450 or MS440 as a greater alternative to MGOblock; For MX or MS large-scale Decoder - all types - as additional energy storage).Not allowed for MX Decoders (except major tracks) because charging transistor is not sufficiently powerful.Content: 1 x Golmrund Goldcap Module 140,000 ?F / 16 V, 25 x 14 mm (diameter x height).

MN330P22 digital decoder 1.2A PluX-22. Direct connection of 15 V energy storage to PluX pin strip (unlimited capacity), no wires.Played with a digital project for the RRX Desiro HC.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. The

Dumbo with small lateral resonance body, therefore flatter than the Dumbo LS13x18 (see above), but soundly similar. 26 x 20 x 8 mm, 8 Ohm / 1 W.

Single soft Decoder, sealed, 23 x 12 x 3.5 mm, 0.8 A (tip 2.5), specially designed with waterproof shrink tubing for installation for switch drives in the outdoor.The accessory Decoders of the MX820 family are switched to switching and feedback from soft, light and shape signals, magnetic decouplers, etc. Used. The small size allows installation into the track bedding of or in drive housing, for example from LGB turns. All drive types for soft and shape signals are supported by double coils, mot

Decoder MX634D for the 21MTC interface, 20.5 x 15 x 3.5 mm, 1,2 A, 6 function outputs, connections for external energy storage (ELKOS with min 25V voltage resistance, up to 5000 ?F), FA3, FA4 as logic level Outputs.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mo

Decoder MX616 with strands, 8 x 8 x 2.2 mm, 24 V Voltage resistance, 0.7 A, 6 function outputs, no SUSI pins.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered dr