Decoder MX623R with 8-pin interface NEM652 on wires, 20 x 8.5 x 3.5 mm, 0.8 A, 4 function outputs, with SUSI.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered dr

Prefabricated module made of 6 series-connected mini-gold caps in Lang form (six series) for MS Decoder of Category 2 (ie with direct energy storage connection), e.g. MS450, MS440.Not allowed for MX Decoder because charging transistor is not sufficiently powerful.Content: 5 x Mgolang Mini-Gold Cap Module 50,000 ?F / 16 V, 26.5 x 4.2 x 14 mm.

Vehicle decoder DHSP10A-1 for SX1, SX2, DCC and MM with ribbon cable for NEM 651 (recommended for Minitrix).Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface (if AUX5/AUX6 (Disabled)Capac

Vehicle decoder DHSP10A--0 for SX1, SX2, DCC and MM without connecting wires.Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface (if AUX5/AUX6 (Disabled)Capacitor voltage 16 VCapacitor capa

Vehicle decoder DHSP10A-4 for SX1, SX2, DCC and MM. For the 6-pin interface (recommended for NEM 651).Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface (if AUX5/AUX6 (Disabled)Capacitor v

Vehicle decoder DHSP10A-3 for SX1, SX2, DCC and MM with connecting wires, length approx. 145 mm.Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface (if AUX5/AUX6 (Disabled)Capacitor voltage

Vehicle decoder DHSP10A-2 for SX1, SX2, DCC and MM with connection cable for NEM 651, length approx. 35 mm (recommended for Fleischmann).Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just as small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price. LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of ??13.0mm x 9.2mm

The bigger the speaker, the better the sound. For this reason, ESU offers loudspeakers in various sizes. One of them will definitely fit into your locomotive. If there is not enough space, you can also install the loudspeaker in a "ghost car" directly behind the locomotive.If you are not sure which speaker fits in your model, we generally recommend opening the locomotive and measuring it yourself with a ruler.Speaker 15mm x 11mm, 8 OhmWhen choosing the speaker, the type of decoder used is crucia

Rectangular loudspeaker, 9 x 16 x 5 mm, 8 ohms / 1 W, integrated resonance chamber.

Rectangular loudspeaker, 9 x 16 x 8 mm, 8 ohms / 1 W, integrated resonance chamber.

Rectangular loudspeaker, 12 x 16 x 5.5 mm, 8 ohms / 1 W, no resonance chamber required.

Function sound decoder for control cars and motorless power cars, 21 x 15 x 3.6 mm, 1.0 A, 10 function outputs, PluX-22, speaker output 3 watts / 4-8 ohms, 16 BIT sound, energy storage directly connectable.

Function sound decoder for control cars and motorless power cars, 21 x 15 x 3.6 mm, 1.0 A, 10 function outputs, NEM-652, speaker output 3 watts / 4-8 ohms, 16 BIT sound, energy storage directly connectable.

Function sound decoder for control cars and motorless power cars, 21 x 15 x 3.6 mm, 1.0 A, 10 function outputs, 11 stranded wires, speaker output 3 watts / 4-8 ohms, 16 BIT sound, energy storage directly connectable.

Single soft Decoder, 19 x 11 x 3.5 mm, 0.8 A (tip 2.5).The accessory Decoders of the MX820 family are switched to switching and feedback from soft, light and shape signals, magnetic decouplers, etc. Used. The small size allows installation into the track bedding of or in drive housing, for example from LGB turns. All drive types for soft and shape signals are supported by double coils, motors and EPL.

Decoder MX623 with strands, 20 x 8.5 x 3.5 mm, 0.8 A, 4 function outputs, with SUSI.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered driving (without Decoder re

Sound Decoder lane 0, 34 pins on double pin strips, 50 x 23 x 13 mm, audio 2 x 3 W, 4 A.

MN250 digital decoder 0,2A 11 stranded wires. Wired variant of the MN250, 11 connecting wires.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same driving behavior, the same mapping,

ESU 59315 – LokPilot 5 L DCC/MM/SX/M4, Pinheader with adapter

Interior lighting set with taillight, 255mm, 11 LEDs, "yellow". For lane N, TT, H0. Thanks to a built-in constant voltage supply, brightness that can be set using a potentiometer remains constant regardless of the rail voltage. To avoid flickering, a PowerPack can be connected if desired. The lighting board can be individually shortened and adapted to the length of the carriage. It will be delivered with a red tail light.

Model: HO scale. H / V signal system distant signal with 4 lights (yellow / green / yellow / green) of the DB. Fine scale product with LED. Structure and railing made of brass, fine details made of 3D-printed material. Resistors up to 16 V (direct current) are included.

Model: HO gauge. The satellites are used to locate the vehicle. By determining the transit time of the ultrasonic signal from the vehicle to all satellites, the position of the vehicle can be determined to an accuracy of at least 10 mm. Depending on the size of the system, at least 3 satellites are required for fully automatic Car System Digital operation.