Doehler & Haass SD22 vehicle sound decoder PluX22 2.0A SX1 SX2 DCC MM DC AC. Version with 8-pin interface connector.For optional operation with a conventional DC controller, digital systems according to SelecTRIX 1 and 2 or according to the NMRA standard (DCC)Switching between analogue and digital operation takes place automaticallyIn digital operation, the last programmed one is used system used (it is not switched automatically!)SelecTRIX 1 31 speed steps, 100 addressesSelecTRIX 2 127 speed st

Vehicle decoder DHSP10A-1 for SX1, SX2, DCC and MM with ribbon cable for NEM 651 (recommended for Minitrix).Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface (if AUX5/AUX6 (Disabled)Capac

Vehicle decoder DHSP10A--0 for SX1, SX2, DCC and MM without connecting wires.Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface (if AUX5/AUX6 (Disabled)Capacitor voltage 16 VCapacitor capa

Vehicle decoder DHSP10A-4 for SX1, SX2, DCC and MM. For the 6-pin interface (recommended for NEM 651).Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface (if AUX5/AUX6 (Disabled)Capacitor v

Vehicle decoder DHSP10A-3 for SX1, SX2, DCC and MM with connecting wires, length approx. 145 mm.Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface (if AUX5/AUX6 (Disabled)Capacitor voltage

Vehicle decoder DHSP10A-2 for SX1, SX2, DCC and MM with connection cable for NEM 651, length approx. 35 mm (recommended for Fleischmann).Operating modes: SX1, SX2, DCC, MM, DC analogDimensions [mm]: 12.7 * 8.9 * 3.6Total current rating: 1.5 AMax. motor current: 0.7 AMax. operating voltage: 30 VFunction outputs: Lights: LV, LR (dimmable) 150 mA eachFunction outputs: AUX1, AUX2 (dimmable) 300 mA eachFunction outputs: AUX3, AUX4 1.0 A eachFunction outputs: AUX5, AUX6 unamplifiedWith SUSI interface

Update chip for the control cell phone for installation.

Decoder PluX12, 1A.

Decoder NEM652 (8 pins), 1A.

Decoder mini, 6-wires, 0.5A.

FH18 Vehicle function decoder for optional operation with conventional direct current chassis, digital systems according to SelecTRIX 1 and 2 or NMRA standard (DCC) Switching between analog and digital mode is automatic. In digital mode the last programmed system is used (it is not switched automatically!). SelecTRIX 1 31 speed steps, 100 addresses SelecTRIX 2 127 speed steps, 10,000 addresses, 16 additional functions DCC Short addresses (1-127), long addresses (0001-9999), wit

A new Doehler & Haass decoder developed exclusively for Modellbahn Union / DM-Toys, adapted to the needs of N-gauge model railroaders. As with all comparable Doehler & Haass decoders, the driving characteristics of this decoder are at an excellent level. Two small capacitors are installed on the decoder for driving without data loss. Both the software and the chip itself correspond to the same modern technology as the latest decoders from Doehler & Haass. The decoder, produced in Germany, can be

Energy storage device SP05A-3 for SUSI with 4 connection strands, length approx. 145 mm and with shrink tubingEnergy storage for SUSIDimensions [mm] (with shrink tube) 28.5 * 9.5 * 12.0Stored energy 7.29 WsCapacitor voltage 5.4 VCapacitance 0.5 FBuffer voltage 10.5 VMax. Driving voltage 30 VProduct features and functionsOperation on all locomotive / vehicle decoders with a standard SUSI interfaceAdjustable start of the charging process either according to time or on arrivalAdjustable maximum buf

Driving SX1, SX2 and DCC locomotivesDriving SUSI modulesProgramming SX1, SX2 and DCC locomotivesProgramming SUSI modulesUpdating Doehler & Haass vehicle decodersUpdating components of the Doehler & Haass sound systemLoading sound projects into components of the Doehler & Haass sound systemTrue USB interface (not a USB to serial converter)No driver installation requiredVery easy to handle and useDelivery without power supply

Doehler & Haass DH22B-4 vehicle decoder PluX22 interfaceOperating mode SX1, SX2, DCC, MM, DC analog, AC analogDimensions [mm] (under reserve) 20.7 * 15.8 * 5.2Total load capacity 2.0 AMax motor current 2.0AMax. driving voltage 30 VSwitching voltage with AC-analogue max. 45 V peak = 30 V rms.LV, LR (dimmable) each 150 mAAUX1, AUX2 (dimmable) each 300 mAAUX3, AUX4 each 1.0AAUX5, AUX6 each 1.0AAUX7 1.0AAUX8 unamplifiedwith SUSI interfaceProduct features and functionsFor optional operation with a co

Decoder mini, 6-pin direct plug, 0.5A.

Function decoder, 500 mA.

Update chip for the Central Control 2000 for installation.

Doehler & Haass PD05A-4 Nano locomotive decoder for 6-pole interfaces, NEM 651Nano locomotive decoder 0.5 AMode of operation SX1, SX2, DCC -not DC analog, not MMDimensions [mm]  5.0 * 7.9 * 2.5Total load capacity  0.5 AMax. Motor current  0.5 AMax. Driving voltage  18 V2 light outputs, dimmable  150 mA eachProduct features and functionsFor optional operation with digital systems according to SelecTRIX 1 and 2 or according to NMRA standard (DCC)In digital mode the last programmed system is used (

Decoder, with cable, 0.5A.

This adapter enables the connection of motorized point machines (two wires, change of direction of rotation by reversing the polarity) to our function decoder. A separate adapter is required for each motorized point machine. All properties of the function decoder (adjustable pulse time, short-circuit protection, etc.) are retained.

Function decoder, 500 mA.

Decoder with PluX16 direct plug, 1.5A.

The new eight-fold Doehler & Haass brake module enables asymmetrical digital voltages to be generated at low cost. For each track section you can set separately whether the asymmetry for braking or for slow travel should be generated. Since the asymmetry is only generated when the track signal is also evaluated by the decoder, there is no difference in brightness when lighting when entering or exiting the braking section. Dimensions [mm]: 102 x 63 x 24, operating mode SX1, SX2, DCC, total load c