Model: small, easy-to-install module for the driver's cab. Consisting of a single warm white LED and control electronics.

Operation under DCC with RailComPlus®, M4, Motorola® and Selectrix®, 32 functions switchable (depending on the control panel), 32-bit processor, digital Class "D" amplifier with up to 3 W power (LokSound 5 XL: 13 W), each channel in 16-bit resolution and 31250 kHz sample rate, noise memory with 128 Mbit capacity, motor control with 50 kHz clock speed, RC servos and Susi modules controllable, 3 new, individually adjustable brake controller, two-stage heavy load simulation, Upgradeable with ESU-Lo

The LokSound 5 Nano DCC with a 6-pin interface measures 13mm x 18mm x 4mm. This means it should be compatible with virtually all N and TT scale model trains. The LokSound 5 Nano DCC decoder is a dedicated DCC decoder and comes with an 11 x 15 mm "sugar cube" speaker and a sound capsule kit.Operating modesThe LokSound 5 Nano is a "purebred" DCC decoder. 14 to 128 speed steps are standard, as are 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to Rail-ComPlus®, the decoders r

The compact SwitchPilot 3 Servo Mini decoder is designed for stationary use in hard-to-reach areas of your layout and can control an RC servo drive. The SwitchPilot 3 Servo Mini features an innovative operating concept consisting of a 4-line, backlit OLED display and three input buttons.Operating modesThe SwitchPilot 3 Servo Mini is multi-protocol compatible and can be used with both Märklin® Motorola® control units (e.g., 6021, Central Station®, or Mobile Station®) and DCC-compatible control un

The compact SwitchPilot 3 Mini Decoder is designed for stationary use in hard-to-reach places on your layout and can switch a double-coil turnout drive or two magnetic uncouplers or a two-aspect light signal or two light bulbs or other stationary loads.The SwitchPilot 3 Mini features an innovative operating concept, consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 Mini is multi-protocol compatible and can be used with both Märklin® Motorol

With the CabControl, we combine the ease of use of our popular MobileControl Pro handheld controller with the Integrated Control Unit (ICU) base station, which includes a powerful booster, a high-quality DCC control center with Railcom® and RailComPlus®, and a complete Wi-Fi access point.With its 7A output power, the CabControl is an ideal control center for model railroaders of all gauges who seek simple manual operation via radio, but don't want to forgo the convenience of automatic locomotive

This adapter board provides a comfortable connection of your LokSound 5 L or LokPilot 5 L decoder. The decoder is plugged directly into the socket connectors. On the output side, the most important connections can be contacted directly at robust screw terminals - without soldering! A socket for the optional connection of a SUSI module as well as pin headers for the direct connection of four RC servos complete the equipment. This adapter board enables a professional, clean wiring of your locomoti

DCC operation, Motorola® operation, M4 operation (mfx® compatible), Selectrix® operation, DC analog operation, AC analog operation, DCC programming, 6021 programming, Mobile / Central Station®, M4 programming and automatic logon, RailCom® with RailComPlus®, ABC-, Selectrix®, Märklin®, HLU brake lines, ABC shuttle train, connection possibility for PowerPack, 32 functions switchable (depending on the control panel), updatable with ESU-LokProgrammer. LokSound 5 Soundengine: 10 channels. 16 bit HiFi

Permanent magnet such as 220450, for Anker 200680, D = 18.0mm, for engine plate 204900 (small disc collector motor). For the conversion of old Märklin® all-electric motors you need a permanent magnet. It replaces the previous field winding and helps your old locomotives in conjunction with a LokSound or LokPilot decoder to a driving behavior that you would never have expected the locomotives! In total, there are four different magnets, which is needed exactly depends on the anchor type. The numb

Permanent magnet such as 220560, for armature 217450, D = 24.5mm, for motor plates 216730, 211990, 228500 (large disc collector motor). For the conversion of old Märklin® all-electric motors you need a permanent magnet. It replaces the previous field winding and helps your old locomotives in conjunction with a LokSound or LokPilot decoder to a driving behavior that you would never have expected the locomotives! In total, there are four different magnets, which is needed exactly depends on the an

SwitchPilot 3 servo decoders are optimized for stationary use on your system and can control up to eight RC servo drives. In order to simplify the rather cumbersome configuration of solenoid decoders, the SwitchPilot 3 Servo has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 Servo is multi-protocol capable and can be used with central units based on the Märklin® Motorola® system (e.g. 6021, Central Station

The new smoke generator "Dual" is suitable for vehicles of the nominal sizes Gauge G, Gauge 1 but also for larger vehicles in Gauge 0. In contrast to the two other smoke generators from ESU, both exhaust steam and cylinder vapor are integrated in one housing. Thus, you can finally retrofit your older locomotives with a realistic cylinder steam. The smoke generator "Dual" has a common tank that can be filled from above. Two separate fan motors with separate heating and temperature elements ensure

Adapter board, 18-pin Next-18 female to NEM651 6-pin, Flex, 88mm, with heat shrink tubing.

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

The LokPilot 5 Basic was developed with the goal of offering a contemporary decoder with a reasonable range of functions at a reasonable price. The LokPilot 5 Basic is supplied in two versions: In addition to a version with an 8-pin NEM interface, a version with a 21MTC interface is also available. Thus, the LokPilot 5 Basic is especially recommended for use in H0 gauge vehicles.The LokPilot 5 Basic is a "thoroughbred" DCC decoder. 14 to 128 speed steps are as 0f course as 2- and 4-digit address

The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions. LokPilot 5 micro decoders are o

The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions. LokPilot 5 micro decoders are o

The new ESU PowerPack Mini can be optionally connected to all ESU decoders of the fourth generation (ie: LokPilot V4.0, LokPilot micro V4.0, LokSound Fx V4.0, LokSound V4.0, LokSound micro V4.0 or LokSound V4.0 M4) and fifth generation (LokSound 5 and LokSound 5 micro) are connected and provides your locomotive with reliable energy when driving over dirt and long routes. Its energy storage (with 1 Farad capacity) will buffer both the noise and light and engine functions, allowing your models to

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color brown.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color black.

Lokliege, maintenance couch 33cm made of special foam, for N, TT and H0, with magnetic strip for small parts fixing, can be arranged in rows.The ESU Premium Lokliege is the ideal tool for the maintenance and care of your locomotives. Two recesses are available for perfect work: The locomotive can be clamped upside down to comfortably reach the underbody of the locomotive. In the classic inclined tray, you can easily reach the side walls of the locomotive or set up the locomotive almost verticall

DCC operation, Motorola® operation, M4 operation (mfx® compatible), Selectrix® operation, DC analog operation, AC analog operation, DCC programming, 6021 programming, Mobile / Central Station®, M4 programming and automatic logon, RailCom® with RailComPlus®, ABC-, Selectrix®, Märklin®, HLU brake lines, ABC shuttle train, connection possibility for PowerPack, 32 functions switchable (depending on the control panel), updatable with ESU-LokProgrammer. LokSound 5 Soundengine: 10 channels. 16 bit HiFi

Cable set with 8-pin socket to NEM 652, DCC cable colors, 300mm length. If the locomotive to be converted does not have a digital interface, but you do not want to cut off the interface connector of the decoder, our cable sets 51950 or 51951 will help you: First install a suitable cable harness and then simply plug in the decoder. How to digitize the pros!

The steam smoke distillate produces a realistic dense, white vapor and evaporates residue-free, without the usual traces in the smoke generator, on locomotives, building roofs or plant surfaces. It is also easy to wipe off with alcohol and will not affect the finish or aging of your models.