LokSound 5 Nano empty decoderWith the LokSound 5 Nano DCC, ESU has succeeded in developing yet another significantly smaller LokSound decoder: At only 19.6 mm x 8.5 mm x 3.2 mm, it is the smallest LokSound decoder we have ever built. Thus, it should really find its use in all vehicles of the nominal sizes N and TT. The LokSound 5 Nano DCC decoder is a pure DCC decoder with open wire ends for free wiring and comes with an 11 x 15 mm "sugar cube" speaker along with a sound capsule kit.The LokPilot

The professional test bench is simply connected to your digital central unit or the LokProgrammer. In addition to a 6-pin NEM 651 interface and an 8-pin NEM 652 interface, there is also a 21MTC NEM660 interface, a PluX22 socket and the Next18 interface. Locomotives without interface connectors can be contacted with single cable clamps. A high-quality bell armature motor with flywheel used in conjunction with direction LEDs to control the engine output. An LED monitor informs you about the functi

This adapter board provides the appropriate connection of the LokSound L decoder. The decoder is plugged directly into the female connectors. On the output side, the adapter board provides soldering points for all functions of the decoder. The adapter board can be fixed with screws in the model.

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. Operating modes: The LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters al

The LokProgrammer is the ideal tool for programming all ESU decoders. The LokProgrammer consists of two core components: an interface module, which establishes the physical connection between the PC and the locomotive, and a software component, which runs on every PC under MS Windows. With this combination, it is possible to conveniently set the various features and settings of the ESU decoder. Thanks to the graphical user interface of Windows, the optimal adaptation of a decoder, which so far h

Interior lighting set with decoder, entry and tail lights, 264mm, divisible, PowerPack option, 13 LEDs, yellow.With ESU's digital LED interior lighting, you can retrofit your N, TT, or H0 gauge passenger cars with prototypical, uniform lighting. Two versions are available to suit your desired application.The digital interior lighting units are 264 mm long, 9 mm thick, and each equipped with 13 (!) LEDs. In addition to a warm white version (50718), there is also a board with yellow LEDs (50719) s

Interior lighting set with decoder, entrance and tail lights, 264 mm, separable, PowerPack option, 13 LEDs, warm white.With ESU's digital LED interior lighting, you can retrofit your N, TT, or H0 gauge passenger cars with prototypical, uniform lighting. Two versions are available to suit your desired application.The digital interior lighting units are 264 mm long, 9 mm thick, and each equipped with 13 (!) LEDs. In addition to a warm white version (50718), there is also a board with yellow LEDs (

Docking Station for Mobile Control II / Pro, stand/wall mount, with 1m USB cable.This docking station is the perfect companion for your ESU Mobile Control II or Mobile Control Pro Wi-Fi radio controller. The docking station serves two purposes: First, it ensures safe storage of the handheld controller when not in use. Second, the handheld controller can be charged directly in the docking station. No cables are required: To charge, the docking station connects to the charging points provided on t

Adapter cable, 18-pol. Next18 female to open strands, 88mm, with heat shrink tubing.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color green.

SwitchPilot 3 Plus decoders are optimized for stationary use on your layout and can switch conventional double-coil turnout drives, light signals, magnetic decouplers, light bulbs or other stationary consumers. In order to simplify the rather cumbersome configuration of solenoid decoders, the SwitchPilot 3 Plus has an innovative operating concept consisting of a 4-line, illuminated OLED display and three input buttons.Operating modesThe SwitchPilot 3 Plus is multi-protocol capable and can be use

Loudspeaker set, Dual 11x15mm, Modular sound capsule set for 28mm, 20x40mm, 16x35mm. With the new modular speaker set for two miniature speakers, you can assemble the right sound capsule yourself. Both the diameter and the height can easily be adjusted individually. By using two loudspeakers in parallel, an enormous sound pressure is generated with very good sound reproduction. The well-known "sugar cube" speaker with 11x15mm size and 8 ohm impedance is supplied with a hermetically sealed retain

Speaker 15mm x 11mm, 8 ohms, with sound capsule. Sugar cube. An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions. LokPilot 5 micro decoders are o

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all of the features, but the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility is rewarded with a lower price. LokPilot 5 decoders are offered with all common interfaces. Operating modes: The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®,

Permanent magnet, for Märklin® 3015, ET800, ST800, Spur 1 all-electric motors. For the conversion of old Märklin® all-electric motors you need a permanent magnet. It replaces the previous field winding and helps your old locomotives in conjunction with a LokSound or LokPilot decoder to a handling that you would never have expected the locomotive! In total, there are four different magnets, which is needed exactly depends on the anchor type. The number of the anchor can be found in the spare part

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color blue.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color yellow.

ESU PowerPack MiniXS can be connected to all fifth generation ESU decoders (LokSound 5, LokPilot 5, LokPilot 5 Basic) and reliably supplies your locomotive with energy when driving over dirt spots and long switch routes.With the help of its energy storage (with 6 x 0.22 Farad capacity), both the noise and the light and motor functions are buffered, ensuring that your models can continue to drive without power for up to 1.5 seconds, depending on power consumption. This extremely flat module is in

The ESU PowerPack Midi can be connected to all fifth generation ESU decoders (LokSound 5, LokPilot 5, LokPilot 5 Basic) and reliably supplies your locomotive with energy when driving over dirt spots and long switch routes.With the help of its energy storage (with 6x1 Farad capacity), both the noise and the light and motor functions are buffered, ensuring that your models can continue to drive without power for up to 3 seconds, depending on power consumption.The PowerPack Midi, which is equipped

The 21MTC adapter board is suitable if you want to digitize a locomotive without an interface, but do not want to freely wire the decoder or use more than 4 function outputs on your LokPilot or LokSound decoder. This adapter board mimics the typical design of the Märklin® 6090x decoder and can be installed wherever this place would be. The decoder with 21MTC interface is simply plugged onto the board. On the output side, this adapter already offers soldered cables (approx. 20 cm in length) for a

LokPilot 5 Fx DCC Funktionsdecoder 8-pin NEM652The LokPilot 5 Fx DCC is a function decoder without a motor output and therefore perfect for installation in control cars or function models. As the "twin brother" of the LokPilot 5 Fx, it shares its properties and also the basic properties of all other LokPilot 5 decoders, but is a pure DCC decoder. The LokPilot 5 Fx DCC is supplied in three versions: In addition to the "classic" version with an 8-pin NEM 652 cable harness, a version for the 21MTC