LokPilot 5 Fx function decoder DCC/MM/SX 8-pin NEM652The LokPilot 5 Fx is a function decoder without a motor output and is therefore perfect for installation in control cars or function models. Because it speaks DCC with RailCom® as well as Motorola® and Selectrix, it can be used with all common digital centers. It shares its flexible function key assignment and the various light effects with the other LokPilot 5 decoders from ESU.The LokPilot 5 Fx is supplied in three versions: In addition to t

The LokPilot 5 Fx micro and its “twin” LokPilot 5 Fx micro DCC is an extremely small function decoder with a footprint of only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm). It is used in all vehicles of nominal sizes N to H0 that do not have an engine output, but should still be able to switch light effects. LokPilot 5 Fx micro decoders are always offered with an 8-pin interface. Operating modes: The LokPilot 5 Fx micro is a real multi-protocol decoder. It masters the

The 380mm long, 15mm wide wagon interior lighting with the article number 50703 is intended for use in track-1 vehicles. It carries both white and yellow LEDs, which are separately adjustable in brightness. This allows you to set the desired color for the first time. The lighting board can be individually shortened and adapted to the length of the carriage. It comes with a red taillight. Thanks to the digital interface (21MTC), a function decoder can be retrofitted at any time.

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just as small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price. LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of ??13.0mm x 9.2mm

The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. Operating modes: The LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters al

The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer printed circuit boards and the latest manufacturing technology, it is so small with only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm) that it can be used even in very small locomotives Nominal sizes Z, N or TT can accommodate. Nevertheless, functionality and robustness were not spared compared to the larger versions. LokPilot 5 micro decoders are o

The LokPilot 5 Fx micro and its “twin” LokPilot 5 Fx micro DCC is an extremely small function decoder with a footprint of only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm). It is used in all vehicles of nominal sizes N to H0 that do not have an engine output, but should still be able to switch light effects. LokPilot 5 Fx micro decoders are always offered with an 8-pin interface. Operating modes: The LokPilot 5 Fx DCC “only” speaks the DCC protocol, but can also be aut

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

The Mobile Control Pro is ESU's latest answer to the question of how to combine the advantages of smartphone technology with the needs of model railway control. The Mobile Control Pro is essentially a compact Android-based tablet equipped with controls for controlling your locomotives and magnetic accessories. The connection to the digital command station is established exclusively wirelessly via Wi-Fi. A specially designed app by ESU can communicate directly with a variety of digital command st

The LokSound 5 Fx is a special feature within the LokSound family: It has no motor output and is specially designed for use in control cars or power cars that require a sound but do not have a model drive themselves. By omitting the motor part, it can still offer all the sound features of the other LokSound 5 members on a size of only 21.5mm x 15.5mm.LokSound 5 Fx decoders are offered with an 8-pin interface according to NEM652 or a 21MTC interface and always come with an 11 x 15 mm "sugar cube"

This adapter board, measuring 54.0 mm x 17.0 mm, features an ESU PowerPack on board. Although the capacitors projecting at the front and rear result in a total length of 70 mm, this adapter board is ideal for converting many American H0 locomotives from Atlas or Athearn, where it replaces the original circuit board. In addition to connection pads for the motor and track, there are also pads for the function outputs AUX1, AUX2, AUX3, AUX4, AUX5, AUX6, AUX7, and AUX8. The series resistors for the

With this expansion board you can elegantly extend your LokPilot V4.0 or LokSound V4.0 decoder (with 21MTC interface!): Simply plug the decoder onto the device and use 8 additional function outputs (AUX3 to AUX10) for lighting effects, coupling etc. You can also connect 4 RC servos. The necessary 5V voltage is also provided. The highlight of the module is the control electronics for clocked smoke generators: Simply install an ESU smoke generator (from the BR 215) in your locomotive and let it ge

Hardware: H4 booster with 7.0 A continuous output power.Output protected against overload and short circuit.Thermal overload protection.Galvanic isolation of track exit and EcoSlink bus.NMRA DCC RailCom® feedback integrated.M4 feedback device integrated.Operating modes: Use with ESU ECoS or Märklin® central station® 60212. Supported data formats (depending on the control panel): NMRA DCC, Motorola®, Selectrix®, M4.Dimensions in mm: 180 x 76 x 40 mm.Scope of delivery: ECoSBoost with 7.0A output p

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all of the features, but the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility is rewarded with a lower price. LokPilot 5 decoders are offered with all common interfaces. Operating modes: The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®,

LokPilot 5 Fx function decoder DCC/MM/SX 21MTC NEM660The LokPilot 5 Fx is a function decoder without a motor output and is therefore perfect for installation in control cars or function models. Because it speaks DCC with RailCom® as well as Motorola® and Selectrix, it can be used with all common digital centers. It shares its flexible function key assignment and the various light effects with the other LokPilot 5 decoders from ESU.The LokPilot 5 Fx is supplied in three versions: In addition to t

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just as small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price. LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of ??13.0mm x 9.2mm

This new "sugar cube" speaker, measuring 13mm x 18mm, is larger than the previous ESU speaker. Since the diaphragm is a good 40% larger, it can deliver significantly higher sound pressure. Both bass and mid-range and high-frequency reproduction are flawless. This speaker can be used anywhere our bass reflex speakers don't fit, but where the best possible bass reproduction is still important. The same principle applies to our new speaker: the larger the enclosure, the better the sound. We include

For difficult installation situations with limited space, particularly in N-gauge models, we recommend our miniature speaker, which requires only 10 mm x 12 mm of space. This speaker was selected by our audio engineers after extensive testing because it offers a good compromise between acceptable bass reproduction and volume. This miniature produces astonishingly high sound pressure levels – when combined with the appropriate sound capsule. The set includes four sound capsules of different heigh

This speaker module offers extremely good performance in a modest size. With the help of the built-in passive radiator in combination with a high-performance rectangular speaker, the module achieves high-quality bass reproduction and considerable sound pressure even in the highs and mids. It was developed as a replacement for the factory-installed speakers specifically for American Scaletrains (SXT) diesel locomotives: It fits without any modification to the locomotive. The speaker is a perfect

Operating modes: Additional module for ECoSDector is supplied and controlled by this. Transistor outputs are powered externally. Outputs: 32 transistor outputs, each 100mA output power. Design as "open collector" which are switched to ground. Maximum 1.5A output power of all outputs together. Dimensions: 86mm x 86mm x 25mm. Scope of delivery: ECoSDetector Extension, connection terminals, detailed instructions.

With the help of the BLI Paragon 3/4 (P34) adapter board, H0 tender steam locomotives from Broadway Limited (BLI), in which a Paragon 3 or Paragon 4 decoder was installed ex works, can finally be equipped with a LokSound 5 decoder without much effort. All you have to do is open the tender, remove the standard Paragon 3 or 4 decoder and install the BLI P34 adapter board. All connections can be made exactly as before: The type and position of all plug connections is exactly the same as in the fact

The 21MTC adapter board is suitable if you want to digitize a locomotive without an interface, but do not want to freely wire the decoder. The adapter board provides a recording option for decoders with 21MTC interface. This decoder is simply plugged. On the other hand, 21 pads allow a clean wiring of your locomotive. This adapter board allows you to perform a clean conversion and take advantage of the additional features of the 21MTC interface (such as speaker outputs). Dimensions: Length 22.0m

The new ESU PowerPack Maxi has been developed as a powerful addition to the LokSound L V4.0 / LokSound 5 L, but can also - if space is available - on all LokPilot V4.0, LokSound V4.0, LokSound V4.0 M4 and LokSound 5 and reliably supplies your locomotive with energy when driving over dirt and long routes. Two energy storage devices (5 Farad capacity each) buffer both the sound and lights and engine functions, allowing your models to continue without power for up to 3 seconds, depending on power c

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally