Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color violet.

1 amp miniature switching relay, 16 volts. With the small switching relay loads can be switched, which require more power than a function output of the decoder can afford. In this case, simply switch the relay in between. If you want to use a smoke generator, you also need the relay, so that it can work properly.

As your facility grows and you need to connect additional ECoSBoost boosters and ECoSDetector feedbacks to your ECoS or Central Station, you need an ECoSlink terminal. ECoSLink terminal bus distributor plate, 6x Connect sockets, 1x 0.9m cable.

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just as small that it can also be accommodated in very small locomotives of nominal sizes Z, N or TT, it is a pure DCC Decoder. This lack of flexibility is rewarded with a lower price. LokPilot 5 micro DCC decoders are available with all common interfaces. The variants with Next18 or PluX16 interface are a bit larger with a base area of ??13.0mm x 9.2mm

The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of gauge H0 and 0. Operating modes: The LokPilot 5 is a real multi-protocol decoder. He masters the data format DCC as well as Motorola®, Selectrix® and M4. In DCC format, 14 to 128 speed steps are as natural as 2 and 4-digit addresses and up to 32 functions. Thanks to RailComPlus®, the decoders log on to a suitable digital center fully automatically. It masters al

DCC operation, Motorola® operation, M4 operation (mfx® compatible), Selectrix® operation, DC analog operation, AC analog operation, DCC programming, 6021 programming, Mobile / Central Station®, M4 programming and automatic logon, RailCom® with RailComPlus®, ABC-, Selectrix®, Märklin®, HLU brake lines, ABC shuttle train, connection possibility for PowerPack, 32 functions switchable (depending on the control panel), updatable with ESU-LokProgrammer. LokSound 5 Soundengine: 10 channels. 16 bit HiFi

The LokSound 5 Fx is a special feature within the LokSound family: It has no motor output and is specially designed for use in control cars or power cars that require a sound but do not have a model drive themselves. By omitting the motor part, it can still offer all the sound features of the other LokSound 5 members on a size of only 21.5mm x 15.5mm.LokSound 5 Fx decoders are offered with an 8-pin interface according to NEM652 or a 21MTC interface and always come with an 11 x 15 mm "sugar cube"

The professional test stand V2.0 is supplemented if necessary with the professional test stand extension. Side-docked to the professional test bench V2.0, the large-web decoder can be conveniently tested. LokSound XL with pin headers and the LokSound L decoder are plugged in directly. An LED monitor with 12 LEDs directly indicates the state of all possible physical function outputs. In addition, you can easily connect a second loudspeaker or the sensor inputs to a terminal strip and test them as

Adapter board, 18-pin Next-18 female to NEM652 8-pin, Flex, 88mm, with heat shrink tubing.

For the professionals among digital converters, the adapter board is intended. This makes the installation easier and safer for us. First, all connections are made to the solder pads of the adapter board instead of the decoder. For this purpose, all signals are multiple and present on the top and bottom. Then the LokSound XL V4.0 decoder with pin header is simply plugged onto the board. Finished. Finally, you can easily remove and replace the decoder at any time.

Many railcars are provided at both ends with a grinder. For proper function in block locations and for timely stopping in front of red signals, it is essential that only one grinder is used to power the decoder, depending on the direction of travel. This is ensured by the slider changeover. It is hung between the pantographs and a LokPilot or LokSound decoder with 21MTC interface. These generate a control signal that evaluates the wiper switching electronics and switches the "right" wiper. This

The new adapter board for decoders with 21MTC interface is suitable for anyone who wants to digitize their locomotives quickly and without much soldering effort and equip them with many functions. The adapter board, with its compact dimensions of 30.5mm x 15.5mm, is almost as big as the decoder and additionally equipped with a break-off mounting strap. For the functions AUX3 to AUX6, which are implemented on VHDM, NEM or NMRA compliant decoders as logic outputs, power amplifiers (approx. 250mA e

On request, this dummy plug replaces a LokSound 5 L or LokSound L V4.0 decoder in locomotives that are to run on analog systems. The dummy plug is plugged onto the Adat board 51959. DIP switches can be used to configure which function outputs should be switched on or off. The definition of the direction of travel is possible. The dummy plug is useful for converters who want to prepare their Track 0 or Track 1 locos digitally using the 51959 board, but do not want to install a LokSound 5L decoder

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color Gray.

Highly flexible cable, diameter 0.5mm, AWG36, 10m winding, color white.

Interior lighting set with taillight, 255mm, 11 LEDs, "yellow". For lane N, TT, H0. Thanks to a built-in constant voltage supply, brightness that can be set using a potentiometer remains constant regardless of the rail voltage. To avoid flickering, a PowerPack can be connected if desired. The lighting board can be individually shortened and adapted to the length of the carriage. It comes with a red taillight. The integrated ESU decoder can be used under Motorola® and DCC and also works on analog

The pantographs ensure optimum power consumption on all commercial vehicles. Simply stick it to the underside of the bogie and the preloaded wheel contacts touch the back of the wheel (wheel flange). Because each pantograph has two spring plates, one per axis. Suitable for all center distances. Suitable for H0 DC and AC or N-lane. Set with 8 pantographs is enough for 8 axles.

Model: small, easy-to-install module for the tail light. Consisting of two red LEDs and control electronics.

Interior lighting set with taillight, 255mm, 11 LEDs, "Warm White". For lane N, TT, H0. Thanks to a built-in constant voltage supply, brightness that can be set using a potentiometer remains constant regardless of the rail voltage. To avoid flickering, a PowerPack can be connected if desired. The lighting board can be individually shortened and adapted to the length of the carriage. It will be delivered with a red tail light.

This loudspeaker module is suitable for large tenders with gauge H0 or OO or models with gauge 0. Its built-in passive radiator, in conjunction with the built-in broadband speaker, results in good bass reproduction without neglecting the highs and mids. Especially for diesel or steam locomotives, this module is a real alternative for those who like deep bass. The speaker fits perfectly with the ESU LokSound 5 or LokSound 5 L decoders.

Loudspeaker set, Single 11x15mm, Modular sound capsule set for 20mm, 23mm, 16x25mm. With the new modular speaker set for a single miniature speaker, you can put together the right sound capsule yourself. Both the diameter and the height can easily be adjusted individually. The sound pressure is significantly better with only one speaker than the round speakers used so far for these dimensions. The well-known "sugar cube" speaker with 11x15mm size and 8 ohm impedance is supplied with a hermetical

An important part of the LokSound system is the loudspeaker. Therefore, only specially designed loudspeakers tuned to the sound decoder are used. Here is the old truism: the bigger the speaker, the better the sound. For this reason, speakers are offered in a variety of sizes. An essential accessory is the sound capsule, which gives the loudspeaker diaphragm the necessary sound pressure and is supplied with most loudspeakers. If you are not sure which speaker fits in your model, then we generally

This new speaker module fits wherever 20mm x 40mm rectangular speakers were previously installed. With the help of the built-in passive radiator in conjunction with a high-performance rectangular speaker, the module achieves significantly improved bass reproduction and achieves a considerable sound pressure even in the highs and mids. The module is particularly suitable for diesel or steam locomotives where contemporary bass reproduction is important. The speaker fits perfectly with the ESU LokS