Model: O gauge DC. FS Eanos high side gondola, equipped with metal wheel sets, spring buffers, close coupling link according to NEM, standard coupling shaft, can be retrofitted with original screw coupling.Lenz has adopted some forms of the models developed and produced by MTH. These will be brought closer to the Lenz standard with technical adjustments.Prototype: The Eanos cars were created as a result of UIC standardization at the beginning of the 1970s and are in use by numerous European rail

Model: O gauge DC. ÖBB Eanos high side gondola, equipped with metal wheel sets, spring buffers, close coupling link according to NEM, standard coupling shaft, can be retrofitted with original screw coupling.Lenz has adopted some forms of the models developed and produced by MTH. These will be brought closer to the Lenz standard with technical adjustments.Prototype: The Eanos cars were created as a result of UIC standardization at the beginning of the 1970s and are in use by numerous European rai

Model: O gauge DC. ERR Eanos high side gondola, equipped with metal wheel sets, spring buffers, close coupling link according to NEM, standard coupling shaft, can be retrofitted with original screw coupling.Lenz has adopted some forms of the models developed and produced by MTH. These will be brought closer to the Lenz standard with technical adjustments.Prototype: The Eanos cars were created as a result of UIC standardization at the beginning of the 1970s and are in use by numerous European rai

Model: O Gauge DC. Covered freight wagon type Gls 205 as a railway service car from the Wiebe company. The Lenz Gauge 0 freight wagons have, among other things:Ventilation openings that can be opened individuallyDoors with functional lockingequipped with metal wheel setsCurrent consumption in the axle bearings, therefore no influence on the running propertiesWheel flange height less than 1.2mmautomatic coupling with close coupling gateStandard coupling shaftSpring bufferCan be retrofitted with o

Model: Gauge O. Lattice mast lamp, height 280 mm, LED. Brass finished model. The foot shown in the photo is not included.

The brake module LG100 serves to provide prototypical slowing and stopping of digital locomotives in front of a red signal. LG100 generates the control signals for a power station, just like the DIGITAL plus command station LZ100. The LG100 does not have an amplified output for connection to the track. For operation, a power station (such as an LV100) with its corresponding transformer is needed.

Model: Gauge O. Length 914mmDelivery without rail connectors. Production in cooperation with Peco.

Four turnouts or signals etc. can be connected to the LS101 switching decoder, the successor of the well-known LS100. DC voltage is applied to the outputs. This must be taken into account when using light-emitting diodes. Via the terminals R and S of the LS101, the connection with the control unit necessary for the feedback of the switch position is established, the switch or signal position is then displayed in the hand controller, for example, or passed on as information to a control programme

Model: O gauge. Track extension set, consisting of: 8 x track G1 straight 45010, 2 x track G2 straight 45011, 2 x track curved 45025, 1 x manual switch left 45031-01, 1 x manual switch right 45032-01.

Radius 1028,7mmProduced in cooperation with Peco.

Starter Digital Set, consisting of starter control unit, starter hand controller and plug-in power supply. With the Starter Digital up to 4 locomotives can be controlled independently, up to 10 functions in the locomotives can be addressed, up to 10 points (or signals) can be switched digitally and 2 starter hand controllers can be operated in parallel. The power supply has a typical output current of 4A, guaranteed 3A.

Model: 0 Gauge. The turntable has a total of 32 exits, 31 of which can be used for rail connections. The first exit is used by the drive and therefore cannot be used as a rail connection. The turntable comes with 8 pieces of track with which you can equip four exits. Further pieces of track (8 pieces in each bag) are available under item no. 49020 available. The outlets have an angle of 11.25 ° to each other. This angle corresponds to that of the switches in the Lenz track system. The outer diam

Pack of 20 connectors for Lenz gauge 0 tracks.

Double crossing turnout Manual turnout radius R10 1649.39mm, length 585.88 mm.

Model: 0 Gauge. Supplementary set for turntable, for 4 track exits with rail connectors.

Pack of 20 connectors for Lenz gauge 0 tracks.

Lenz 45035 Bogenweiche rechts

Lenz 45034 Bogenweiche links

Lenz 45025 Gleis gebogen R10 11,25°

Two pieces of track of the parallel curve R2. The angle is 7.5°, radius is 1028.7 mm. For use with the 45° curved turnout.Production in cooperation with Peco.

Pack of 20 connectors for Lenz gauge 0 tracks from the new Peco production.

Lenz 45065 Prellbock

Point right Radius 1649,39mm, length 455,39 mm.Please note: G10 track and point motor are available seperately and are not part of the offer.

Point left Radius 1649,39mm, length 455,39 mm.Please note: G10 track and point motor are available seperately and are not part of the offer.