For use with tension lock couplers.

TwistLock is still a basic electric solenoid motor, for operating (in the main) turnouts. It is powered by a normal 16vDC supply (and can take up to 3 amps) and is fully compatible with all Peco turnouts up to O gauge (and can handle many other proprietary brands too). But no longer will any soldering of wires to the terminals be necessary, nor the cutting of large holes in the baseboard. Each motor is supplied with a template, which the modeller uses to accurately mark the position of three hol

Model: HO gauge. SL-U8382 Code 83 Streamline left-hand turnout with wooden sleeper replica, length 322 mm, radius 1702 mm, angle 7.15 degrees, Unifrog variant, frog polarizable. The Streamline Code 83 rails, with a profile height of 2.1 mm and a parallel track spacing of 50.8 mm, are particularly suitable for layouts based on American prototypes due to their appearance.

Brass nails for rail fastening, which also have many other uses. Suitable for all scales.

204 mm track entry wires. Easily expandable with PL-39 terminal blocks and PL-38 red and black wire. For Code 70, OO/HO Code 75, HOm Code 75, HO Code 83.Pack contains 4 pairs.

204 mm track entry wires. Easily expandable with PL-39 terminal blocks and PL-38 red and black wire. For Code 100 and 124.Pack contains 4 pairs.

Magnetic uncoupler for use with Peco Magni Simplex couplings.

Clip this unit either side of an insulation gap on Peco HO/OO track. This can be used to isolate a loco at the end of a terminal road or siding, thereby enabling another loco to take the stock out.

For use with Peco Simplex couplings and Trix couplings.

A simple yet effective method of switching turnouts. The Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then soldered to the tag at the back, which goes to the relevant solenoid of the turnout motor. When power is applied by touching the powered probe on the stud the Turnout Motor is activated.

Model: HO gauge. ST-221 Code 100 Setrack track curved with wooden sleeper replica, radius 371 mm, angle 45 degrees.The Setrack Code 100 rails with a profile height of 2.5 mm can be used with NEM 310 as well as with all flatter wheel sets like the RP 25 without any problems. The parallel track spacing of the Setrack Code 100 track system is 67 mm. The Setrack track system offers the possibility to easily connect and disconnect the tracks, also the wiring is very easy. The Setrack Code 100 tracks

Model: HO gauge. ST-2035 Code 100 Setrack curved track with wooden sleeper replica, radius 571.5 mm, angle 22.5 degrees.The Setrack Code 100 rails with a profile height of 2.5 mm can be used with NEM 310 as well as with all flatter wheel sets like the RP 25 without any problems. The parallel track spacing of the Setrack Code 100 track system is 67 mm. The Setrack track system offers the possibility to easily connect and disconnect the tracks, also the wiring is very easy. The Setrack Code 100 tr

Model: HO gauge. ST-2030 Code 100 Setrack curved track with wooden sleeper replica, radius 505 mm, angle 22.5 degrees.The Setrack Code 100 rails with a profile height of 2.5 mm can be used with NEM 310 as well as with all flatter wheel sets like the RP 25 without any problems. The parallel track spacing of the Setrack Code 100 track system is 67 mm. The Setrack track system offers the possibility to easily connect and disconnect the tracks, also the wiring is very easy. The Setrack Code 100 trac

Model: HO gauge. ST-2020 Code 100 Setrack track curved with wooden sleeper replica, radius 371 mm, angle 22.5 degrees.The Setrack Code 100 rails with a profile height of 2.5 mm can be used with NEM 310 as well as with all flatter wheel sets like the RP 25 without any problems. The parallel track spacing of the Setrack Code 100 track system is 67 mm. The Setrack track system offers the possibility to easily connect and disconnect the tracks, also the wiring is very easy. The Setrack Code 100 trac

Model: HO gauge. ST-2001 Code 100 Setrack tracks straight with wooden sleeper replica, length each 335 mm.The Setrack Code 100 rails with a profile height of 2.5 mm can be used with NEM 310 as well as with all flatter wheel sets like the RP 25 without any problems. The parallel track spacing of the Setrack Code 100 track system is 67 mm. The Setrack track system offers the possibility to easily connect and disconnect the tracks, also the wiring is very easy. The Setrack Code 100 tracks fit easil

Model: HO gauge. SL-97 Code 100 Streamline Y-turnouts with wooden sleeper replica and conductive frog, length 148 mm, radius 610 mm, frog angle 24 degrees.The Streamline Code 100 rails with a profile height of 2.5 mm can be driven on without any problems with NEM 310 as well as with all flatter wheelsets like the RP 25 wheelsets. The parallel track spacing of the Streamline Code 100 track system is 52 mm and the track symmetry is also suitable for the Code 75 tracks. The system offers a wide ran

Model: HO gauge. SL-E92 Code 100 Streamline short turnout with wooden sleeper replica and conductive frog, length 185 mm, radius 610 mm, frog angle 12 degrees.The Streamline Code 100 rails with a profile height of 2.5 mm can be driven on with NEM 310 as well as with all flatter wheelsets like the RP 25 without any problems. The parallel track spacing of the Streamline Code 100 track system is 52 mm and the track symmetry is also suitable for the Code 75 tracks. The system offers a wide range of

Model: HO gauge. SL-E8352 Code 83 Streamline short left hand turnout with wooden sleeper replica and conductive frog, length 211 mm, radius 660 mm, angle 11.4 degrees.The Streamline Code 83 rails with a profile height of 2,1 mm and a parallel track spacing of 50.8 mm are particularly suitable for American-style layouts due to their appearance.

Model: HO gauge. SL-94 Code 100 Streamline crossing with wooden sleeper replica, length 127 mm, frog angle 24 degrees.The Streamline Code 100 rails with a profile height of 2.5 mm can be driven on with NEM 310 as well as with all flatter wheelsets like the RP 25 without any problems. The parallel track spacing of the Streamline Code 100 track system is 52 mm and the track symmetry is also suitable for the Code 75 tracks. The system offers a wide range of switches and crossings to easily realize

Model: HO gauge. SL-87 Code 100 Streamline curved turnout with wooden sleeper replica, length 256 mm, radius 1524 mm, frog angle 10 degrees.The Streamline Code 100 rails with a profile height of 2.5 mm can be driven on with NEM 310 as well as with all flatter wheelsets like the RP 25 without any problems. The parallel track spacing of the Streamline Code 100 track system is 52 mm and the track symmetry is also suitable for the Code 75 tracks. The system offers a wide range of switches and crossi

Model: HO gauge. SL-8376 Code 83 Streamline curved right hand turnout with wooden sleeper replica, length 282 mm, radius 1524 mm, angle 11.1 degrees.The Streamline Code 83 rails with a profile height of 2,1 mm and a parallel track spacing of 50.8 mm are particularly suitable for American-style layouts due to their appearance.

Model: O gauge. SL-700FB Code 143 Streamline flexible track with wooden sleeper replica, length 914 mm.The Streamline Code 143 rails with a profile height of 3.63 mm and a parallel track spacing of 80 mm correspond to the modern standard profile.

Designed to be used with H0/00 Code 100 track systems. Also compatible with 0 Gauge Bullhead and 0-16.5/0n30 track systems.

Model: HO gauge. SL-100 Code 100 Streamline Flex Track with concrete sleeper replica, length 914 mm.The Streamline Code 100 rails with a profile height of 2.5 mm can be driven on with NEM 310 as well as with all flatter wheelsets like the RP 25 without any problems. The parallel track spacing of the Streamline Code 100 track system is 52 mm and the track symmetry is also suitable for the Code 75 tracks. The system offers a wide range of switches and crossings to easily realize even complex track