Model: HO gauge. With fine latticed brass mast and authentic varnishing. Printed signal arms. Underfloor drive unit with integrated automatic train control. Maintenance free due to LED lighting. Signal aspects Hp0 and Hp2.Dimensions: height 10,3 cm.

Model: HO gauge. With fine brass mast and authentic varnishing. For authentic slow motion function only item 5216 slow speed resistor is required. Integrated main switching contacts arrange authentic stop. Next main signal shows stop. With printed signal disk and signal arm, bulbs and underfloor drive unit. Signal aspects Vr0 and Vr2. Spare bulb: Item 6200.Dimensions: height 5,1 cm.

Model: HO gauge. Ready-to-install and varnished. The track distances are variably adjustable. The 3 tracks are electrically insulated. fine metal work with stamped rivet imitations. Maximum mast distance: 23,5 cm,Dimensions: height 15 cm.

Model: HO gauge. Suitable for all Viessmann H0 catenary masts. Middle crossarm: 4,4 cm.

Universal usage. Practical help for the power distribution, e.g. illumination items. The rails are fixed by their self-adhesive rear side. You can solder the attached wires as well as up to 10 distribution wires each at the joints. The supply wires can be continued at the other end.

Universal usage. Usable for all 2-aspect colour light main signals (block signals) and light block signals with LED lighting scale 0 up to Z (except signals with multiplex-technology). The module provides the block signal pictures Hp0 and Hp1. Authentic smooth switch of signal pictures. Integrated contact for train control. By stop showing signal the track in front of the signal is switched off. Control by universal push button panel item-No. 5547, single button, switching tracks, track contacts

Universal usage. With impulse contact for two 4-aspect colour light signals, to activate the signals stop, proceed, proceed at reduced speed and stop for shunting movements by control module item-No. 5210 as well as the control module for colour light departure signals item-No. 5223. In analogue mode controlling with control module item-No. 5224 and 5229, by 4-aspect signals connection. Several panels may be connected. Contact load: Up to 2 A.

Universal usage. Allows an automatical stop in station area with soft stop and start movement. Even stopover by shuttle service control module item-No. 5214 and 5204 is possible - one stopover is sufficient for various breakpoints! Push-pull operation is possible. Integrated track occupancy detectors make track- or signal contacts dispensable, works in both directions. Integrated light signal control for both directions with prototypical smooth change of light. The stop time, starting accelerati

Universal usage. Litz very flexible. Especially suitable for digital layouts.

Universal usage. Especially for a safe connection and current transmission.

Universal usage. Especially for a safe connection and current transmission.

Universal usage. Especially for a safe connection and current transmission.

Universal usage. Especially for a safe connection and current transmission.

Universal usage. High-grade litz wire for low-loss current feed and signal transmission.

Universal usage. High-grade litz wire for low-loss current feed and signal transmission.

Universal usage. Each 2 x 12-pole.

Universal usage. Bistable relay with 4 simultaneously switching switchers. The relay converts current pulse, sent by digital magnetic decoders, push button panels, switching tracks or track contacts into continuous current. To switch lamps, signals, etc. and block control. End position switchable by impulse- or current power supply. Authentic feedback is provided in connection with universal push button panel, item 5549. Attached coupling lever. Power consumption 300 mA. Contact load each change

Universal usage. Feedback compatible push button panel with impulse-contact for two semaphore signals with 3 aspects. Authentic feedback of the signals by 6 red, green and yellow LEDs. Several panels can be stringed together. Only usable for signals with authentic limit stop by mechanical contacts. Contact load: 2 A.

Universal usage. Directly pluggable train control relay extends control modules items 5224 and 5229 by the automatic train control but can also be used separately. Control modules can stop the trains automatically. This is possible by switching off (separately track and catenary) or in digital operation more authentically by switching to braking module item 5232 (for Märklin Motorola) or braking generator (for NMRA-DCC). Therefore it is equipped with bipolar switch. Relays have to be switched to

Universal usage. 2 separate monostable relays with each 2 double-pole double-throw. The relays have no limit switch, nevertheless they can be driven with steady current. The control takes place by negative switch impulses resp. steady current, AC voltage or digital current. Due to internal electronics the relay is noiseless even by connection to digital circuits or pulsed signals. It is suitable to connect light signals to modules which otherwise only control colour light signals, e.g. item-No.

Universal usage. The module offers an integrated digital decoder (Märklin-Motorola, NMRA-DCC) and is used to control 2 colour light signals (one home signal and one distant signal) with LEDs and a common plus pole or bulbs, provided they do not draw more than 200 mA in total. Therefore, it is suitable for all signals scale 0 up to Z (except for the Viessmann signals with multiplex-technology). It can be activated in conventional mode via the push button panels item-No. 5545, 5546 and 5547 or via

Universal usage. Usable in connection with control modules for colour light signals item-No. 5221 - 5223 and hobby light signals, item-No. 4021, 4022. The module offers 3 possible distant signal aspects (Vr0, Vr1 and Vr2). Authentic smooth switch of signal pictures. By masking the stop showing home signal fixed on the same mast the distant signal is switched off.

Universal usage. To reduce the voltage on slow speed sections, e.g. narrowed curves, on building sites or down grades. Integrated 5 watt high power resistors. The value of the resistor is selectable by assignment of the connection socket from 10 - 30 ohm. Short circuit protection included by a temperature dependant switch. An overload short circuit is shown by red LED. On digital layouts only usable with unregulated locomotive decoders.

Universal usage. The module provides an automatic shuttle of a train between 2 terminals. Easy connection (only 4 cables). No switching contacts are required, position of the train is identified by track occupany detector. Current situation is shown by 4 LEDs. Slow starting and braking. Precise stop is possible. Multiple stays for both stations are separately adjustable. Integrated light signal control by prototypical smooth signal pictures. Full automatic and semi-automatic modes are available,