Decoder MX616N 6-pin pin strip, 8 x 8 x 2.2 mm, 24 V Voltage resistance, 0.7 A, 6 function outputs, no SUSI PINS.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovere

Round loudspeaker 23mm x 6mm, with intermediate resonant body 8 ohm / 1 W.

8-pin (2 x 4) pin header in the grid 2.54 mm (corresponds to NEM652 plug) to make a R-type t-type normal wired Decoder; e.g. from MX630 MX630R.

Functional sound decoder with Next18 interface for control cars and motorless power cars.13.6 x 9.3 x 3.1 mm0.7 A total current, duration6 amplified function outputsSUSI pins (SUSI, servo or logic level inputs/outputs)Speaker output 1 watt / 8 ohmsSpeaker connection available on interface and solder pads

Sound Decoder with 21MTC interface, 30 x 15 x 4 mm, audio 3 W (4 ohms), 1.2 A, 6 FU, FA3, FA4, FA5, FA6 preconfigured as reinforced outputs, Connection for energy storage 15 V (arbitrary capacity) .

MN170F digital decoder 0.7A 6-pin interface NEM651 on wires. Variant of the MN170, 6-pin interface NEM651 on wires, 1 free wire.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same d

Decoder software updates and loading of sound projects directly from the computer. The Zimo KLUG is the new compact loading and update device for Zimo decoders. It is versatile, handy, and affordable – yet it forgoes a display and requires only a connection to a computer (Windows) and decoder loading and update software. A decoder can either be plugged directly into the Zimo KLUG or – remaining in the vehicle without opening it – connected via the track. The MSTAPK and MSTAPG boards can also be

DC power supply 18V, 2.22A, 40 watts, for Mxulfa

Function Decoder, 25 x 15 x 4 mm, 1.8 A, 10 function outputs, energy storage terminal, variable low voltage output, 10 stranded wires.

Sound Decoder with NEM 658 16-pin PLUX16 interface, 30 x 15 x 4 mm, 13 connecting wires (2 x rail, 2 x motor, acc. Plus, mass, Elko Plus, 4 foot outputs, 2 x speakers), 6 solder Pads (other FU outputs), direct connection energy storage 15 V (unlimited capacity) on Plux pin header.

50 pieces 6-pin modular plug (Western Strecker) for mounting.The ZIMO Bus System, based on the industrial-proven CAN protocol, is the most powerful and reliable under Digital system bus systems with at least 1000 messages / sec. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connected to each other via the CAN bus (Controller Area Network), and wrap it over its traffic with 125 kbit / s. The protocol originated from automotive

Sound Decoder NEM 652 8-pin interface on wires, 19 x 11 x 3.1 mm, with 6 foot outputs, 13 connecting wires (2 x rail, 2 x motor, 2 x acc. Plus, mass, 4 FU outputs, 2 x speakers), 2 solder pads (other FU outputs).

Basic device MX10 + Fahrer MX33FU + USB stick + CAN cable + 8pola1m + power supply NG300 + operating instructions (MX10, MX33)

Basic device MX10EC + Fahrer MX33FU + USB stick + CAN cable + 8pola1m + power supply NG300 + operating instructions (MX10, MX33)

22-pin SMD pin header (as it is mounted on Plux Decoders as a plug)

Function Decoder, 20 x 11 x 3.5 mm, 1.0 A, 8 function outputs, with 16-pin PLUX16 interface NEM658.

Decoder MX636VD with 21MTC interface NEM660, 26 x 15 x 3.5 mm, 1.8 A, 6 function outputs, energy storage connection also for 16 V ELKOS and gold caps, semi-synchronous rectifier for higher motor current and total load capacity (up to 1.8 A ), with additional adjustable low voltage.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving st

MN300R digital decoder 1.0A 8-pin interface NEM652 on wires. Variant of the MN300, 8-pin interface NEM652 on wires, 3 free wires.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same

MN170N digital decoder 0.7A 6-pin interface NEM651 on decoder no wires. 6 FA 6-pin interface NEM651 on decoder, no wires.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same driving

Rundautspeaker 28mm x 6mm, with intermediate resonant body 8 ohm / 1 W.

Round speaker 28 mm, preferably to use in locomas provided for the installation of such a loudspeaker, so integrate the resonance body in the locomotive housing, 8 ohm / 1 W.

Miniature Rectangle Speaker with integrated resonance body, 11 x 15 x 7 mm, 8 ohm / 1 W.

Adapter board for connecting PluX22 decoders to special 21MTC boards that require 5 V levels at the logic level outputs.Only required for special 21MTC locomotive boards - e.g., Sudexpress Eurodual, Stadler BR 159, LS Models BR 120, or LS Models BR 184 (reissues from 2023) - to use a PluX22 decoder (only MX633P22, MX635P22, MN330P22, MS450P22 - NOT MX645P22)New Revision C from July 2023: RevC suitable for Sudexpress Eurodual, Stadler BR 159, LS Models BR 120, and LS Models BR 184.16.8 mm x 19.5

Power supply 320W (30V; 10.7A) Meanwell HLG-320H-30A; 23x9x4,5cm; 1.8kg;