Function Decoder, 20 x 11 x 3.5 mm, 1.0 A, 8 function outputs, with 8-pin interface NEM652 on wires.

The Zimo Digital Centers: No big boxes, but state-of-the-art technology:At first glance, the very small dimensions (depending on the type 18 and 15 cm wide, 3 cm high) fall on, as well as the absence of heat sink and fans. Thanks to state-of-the-art Leistungslelektronik - five high-frequency switching regulators for rail outputs and auxiliary voltages - the device running despite 20 A (MX10EC: 12 A) on the rail and 5 A on the bus not hotbut the ZIMO system takes the same consideration for applic

Servo Decoder, 105 x 50 x 15 mm, 3.0 A. for 8 servos (8x 3pol plug incl. 5-6V supply), 16 inputs (position contacts, foreclosure) and 16 outputs (signal lights, polarization relay); Additionally included: 2x plug (2pol plug-k), 1m 20pol ribbon cable, 2x 20pol cutting bracket.

Decoder MX636C with 21MTC interface NEM660, 26 x 15 x 3.5 mm, 1.8 A, 6 function outputs, energy storage connection also for 16 V ELKOS and gold caps, semi-synchronous rectifier for higher motor current and total load capacity (up to 1.8 A ), FA3, FA4 as logic level outputs.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256

Decoder MX617F with 6-pin plug NEM651 interface, 13 x 9 x 2.5 mm, 24 V Voltage resistance, 0.7 A, 6 function outputs, no SUSI pins.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge a

Miniature sound decoder, E24 interface, not mfx capable, 19 x 8.7 x 2.8 mm, audio 1 W, 0.8 A.

Sound Decoder, 6-pin interface NEM 651, 14 x 10 x 2.6 mm, audio 1 W, 0.7 A, with 4 FU outputs.

MN170R digital decoder 0.7A 8-pin interface NEM652 on wires. Variant of the MN170, 8-pin interface NEM652 on wires.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same driving behavi

MN170 digital decoder 0.7A 10 stranded wires. Wired variant of the MN170, 9 connection wires (2x rail, 2x motor, Gem. Plus, 4x FA) 5 solder pads (2x FA, 2x SUSI, ground).Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similari

Prefabricated module made of 7 in series-connected gold caps in round shape for Decoder of Category 2 (for MS Decoders such as MS450 or MS440 as a greater alternative to MGOblock; For MX or MS large-scale Decoder - all types - as additional energy storage).Not allowed for MX Decoders (except major tracks) because charging transistor is not sufficiently powerful.Content: 1 x Golmrund Goldcap Module 140,000 ?F / 16 V, 25 x 14 mm (diameter x height).

MN330P22 digital decoder 1.2A PluX-22. Direct connection of 15 V energy storage to PluX pin strip (unlimited capacity), no wires.Played with a digital project for the RRX Desiro HC.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. The

Dumbo with small lateral resonance body, therefore flatter than the Dumbo LS13x18 (see above), but soundly similar. 26 x 20 x 8 mm, 8 Ohm / 1 W.

Single soft Decoder, sealed, 23 x 12 x 3.5 mm, 0.8 A (tip 2.5), specially designed with waterproof shrink tubing for installation for switch drives in the outdoor.The accessory Decoders of the MX820 family are switched to switching and feedback from soft, light and shape signals, magnetic decouplers, etc. Used. The small size allows installation into the track bedding of or in drive housing, for example from LGB turns. All drive types for soft and shape signals are supported by double coils, mot

Decoder MX634D for the 21MTC interface, 20.5 x 15 x 3.5 mm, 1,2 A, 6 function outputs, connections for external energy storage (ELKOS with min 25V voltage resistance, up to 5000 ?F), FA3, FA4 as logic level Outputs.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mo

Decoder MX616 with strands, 8 x 8 x 2.2 mm, 24 V Voltage resistance, 0.7 A, 6 function outputs, no SUSI pins.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered dr

Adapter board for PLUX22 Decoder, the Decoder is plugged into the socket strip of the adapter. About large solder pads, the wiring within the locomotive CAN be made comfortably, whereby the connections (plus lines) common for a variety of devices (plus lines) are multiply. The AdapLu adapter board is equipped with a rectifier that relieves the rectifier of the Decoder, creating this less loss heat and outputs more power for it.The AdapLu adapter board CAN be used with PLUX22 Decoders equipped wi

Decoder MX622R with 8-pin interface NEM652 on wires, 14 x 8 x 2.5 mm, 0.8 A, 4 function outputs, no SUSI pins.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered d

Sound decoder, Next18 interface NEM 662, 24.9 x 10 x 4 mm, 0.8 A.Sound Decoder, NEXT18 interface NEM 662, 15 x 9.5 x 3.3 mm, audio 1 W, 0.7 A.

Two dumbos, high volume and good bass reproduction. 55 x 22 x 9 mm, 4 Ohm / 2 W.

Dumbo with longer (but still flat) resonance body, therefore particularly good playback of bass tones 40 x 20 x 9 mm, 8 ohm / 1 W.

Miniature Rectangle Speaker with integrated resonance body, 11 x 15 x 12 mm, 8 ohm / 1 W.

Mxulfa with license for PC software P.F.U.Sch. from Hr. Ewald locker

Decoder MX622F with 6-pin plug NEM651 interface, 14 x 8 x 2.5 mm, 0.8 A, 4 function outputs, no SUSI pins.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read), Uncovered drivi

Decoder Update Device and Sound Charging Device (2 x 16 Characters) Software Update and Sound Loading from the USB Stick or Computer, Sound Loading Also via SUSI, Test Operation (Driving, Turning Functions) Included: Plug, USB stick with operating instructions, Susikab.