CAN bus cable 8pol 1 m length.

Finished CAN bus cable with plugs attached on both sides (also called driving cord) in 15 cm in length. The very short version is specifically suitable for connecting two side-by-side drivers.The Zimo Bus System, based on the industrial-proven CAN protocol, is the most powerful and reliable and reliable under the Digital system bus systems with at least 1000 messages / sec. The ZIMO system components, such as base units, booster, driveline, magneticle and track section modules, etc., are connect

MN180N18 Digital Decoder 0.7A Next18. 4 + 2 FA 4 amplified outputs + 2 SUSI + 2 logic level outputs according to the VHDM standard Direct connection of 15 V energy storage to solder pads (up to 15,000 µF).Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointl

Amplifier module for a logic level output of a Decoder. Most ZIMO Decoders have such logic level outputs in addition to the normal function outputs, which are switched between 0 V (for OFF and 5V (for a) and need not be charged, but need an external amplifier. Mostly logic level outputs are an alternative use of the SUSI connections (Clock and Data), and are activated by CV # 124, bit 7 = 1. The output of the M4000Z supplies up to 0.5 A.

Basic device MX10EC + Roco WLAN mouse + USB stick + CAN cable + 8Pola1m + power supply NG300 + router + 3x battery + operating instructions. MX10

Sound Decoder lane 0, 34 pins on double pin strips, 50 x 23 x 13 mm, audio 2 x 3 W, 4 A.

Function Decoder, 20.5 x 15 x 3.5 mm, 1.2 A, 8 function outputs, energy storage terminal, with 21MTC interface NEM660.

Decoder MX617N NEM651 6-pin pin strip, 13 x 9 x 2.5 mm, 24 V Voltage resistance, 0.7 A, 6 function outputs, no SUSI pins.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledge and read),

Basic device MX10 + Roco WLAN mouse + USB stick + CAN cable + 8pola1m + power supply NG300 + router + 3x battery + operating instructions MX10

Miniature Rectangle Speaker with integrated resonant body, 11 x 15 x 9 mm, 8 ohm / 1 W.

Decoder MX637P22 with 22-pin PLUX22 interface NEM658, 22 x 15 x 3.5 mm, 1,2 A, 10 function outputs, no energy memory connection. Decoder MX637P22 with 22-pin PLUX22 interface NEM658, 22 x 15 x 3.5 mm, 1,2 A, 10 function outputs, no energy memory connection.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal

Light board LIPLDHW1 neutral white LED interior lighting with decoder and second address as an aid to train formation. This is typically set to the address of the locomotive in the light boards and function decoders of a train. This creates the possibility of switching the interior lighting of all these cars, as well as the exterior lights of the rear or control car, using the function keys of a single address (usually the locomotive address). In order to be able to use this comfortably, light c

Decoder MX635P22 with 22-pin PLUX22 interface NEM658, 26 x 15 x 3.5 mm, 1.8 A, 10 function outputs, power store connection 16V (arbitrary capacity, also gold cap), semi-synchronous rectifier for higher motor current and total load capacity (until 1.8 A).General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal st

Decoder MX616R with 8-pin interface NEM652 on wires, 8 x 8 x 2.2 mm, 24 V Voltage resistance, 0.7 A, 6 function outputs, no SUSI pins.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in operational mode (with RailCom to acknowledg

Decoder MX638C with 21MTC interface NEM660, 26 x 15 x 3.5 mm, 1,2 A, 6 function outputs, FA3, FA4 as logic level outputs (changeable via CV # 8), no energy memory connection.General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, programming the CVS in Service Mode (at the programming track) and in oper

MN300F digital decoder 1.0A 6-pin interface NEM651 on wires. Variant of the MN300, 6-pin interface NEM651 on wires, 5 free wires.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same

Sound Decoder NEM 651 6-pin interface on wires, 19 x 11 x 3.1 mm, with 6 foot outputs, 13 connecting wires (2 x rail, 2 x motor, 2 x acc. Plus, mass, 4 FU outputs, 2 x speakers), 2 solder pads (other FU outputs).

Decoder MX635P16 with 16-pin PLUX16 interface NEM658, 26 x 15 x 3.5 mm, 1.8 A, 10 function outputs, power store connection 16V (arbitrary capacity, also gold cap), semi-synchronous rectifier for higher motor current and total load capacity (until 1.8 A).General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal st

Decoder MX636D with 21MTC interface NEM660, 26 x 15 x 3.5 mm, 1.8 A, 6 function outputs, energy storage connection also for 16 V ELKOS and gold caps, semi-synchronous rectifier for higher motor current and total load capacity (up to 1.8 A ).General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 internal stages, program

Function Decoder, 10.5 x 8 x 2.2 mm, 0.7 A, 6 function outputs, 9 stranded wires.

Miniature sound decoder, 12 connection wires (2 x rail, 2 x motor, common plus, ground, 4 FA, 2 x speakers), 19 x 7.8 x 2.8 mm, audio 1 W, 0.7 A.

MN330P22 digital decoder 1.2A PluX-22. Direct connection of 15 V energy storage to PluX pin strip (unlimited capacity), no wires.Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same

MN300P16 digital decoder 1.0A PluX-16. 6 FA Direct connection of 15 V energy storage device to PluX pin strip (up to 15,000 µF).Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These similarities cause, among other things, the same d

6-pin pin header NEM651 for converting to a F type