Function Decoder, 10.5 x 8 x 2.2 mm, 0.7 A, 6 function outputs, NEM651 6-pin pin header.

Miniature sound decoder, 6-pin interface NEM651 (2 x rail, 2 x motor, common plus, ground, 4 FA, 2 x speakers), 19 x 7.8 x 2.8 mm, audio 1 W, 0.7 A.

MN340C digital decoder 1.2A 21MTC. 8 FA FA3-FA6 preconfigured as logic level outputs (VHDM standard), connection for 15 V energy storage on solder pads (unlimited capacity).Technologically, Zimo non-sound decoders correspond to the MS sound decoders. The identical microcontrollers and largely the same components for the power electronics (motor output stages, etc.) are installed in both product classes, and of course the software is also (further) developed jointly to a large extent. These simil

6-pin socket strip in grid 1.27 mm, as a mating plug for Decoder with 6-pin pin header (... n, ... f) to pluggle the Decoder in locomas without interface and thus easy to make interchangeable.

Sational Setup Module Stone in track sections equipment, i.: 8 Connections for track sections (up to 8 A, HLU, occupation message, etc.), 16 inputs (sensors, light barriers, contact tracks, ...). Included: approx. 2m 20pol ribbon cable incl. 1x 20pol Crimp plug, 4x 3pol plug Kl., 3pol plug Gr., 2pol plug, instructions adsfsdaf

Economy basic device Digital Center DCC

Sound Decoder, NEXT18 interface NEM 662, 15 x 9.5 x 3.3 mm, audio 1 W, 0.7 A.

ELKOS for Decoders of Category 2 (ie with direct energy storage connection), 15 V variant, usually several elkos are connected in parallel: at least 3 recommended, with MX Decoders up to 10 - results in maximum capacity of 6800 ?F, at MS Decoders unlimited).Content: 20 x ELKO 2200 ?F / 16 V, 10 x 20 mm (change to ELKOS with higher energy density when availability possible).

16-POL SMD pin header (as it is mounted on Plux Decoders as a plug)

Sound Decoder with a 652 8-pin interface with plug, 30 x 15 x 4 mm, 13 connecting wires (2 x rail, 2 x motor, acc. Plus, mass, Elko Plus, 4 FU outputs, 2 x speakers), 6 Solder pads (other FU outputs).

Round speaker 23 mm, preferably to use in locomas provided for the installation of such a loudspeaker, so integrate the resonance body in the locomotive housing, 8 ohms / 0.5 W.

16-pin bridge plug

Basic device MX10 + Fahrer MX33 + USB stick + CAN cable + 8Pola1m + power supply NG300 + operating instructions (MX10, MX33)

Adapter board for US models (Athearn, Kato, U.V.A ..), for PLUX16 and PLUX22 Decoders. The Decoder is plugged into the socket bar of the adapter. About large solder pads the wiring within the locomotive CAN be made comfortable.The Adapus adapter board CAN be used with Decoders equipped with 16 V energy storage connection. Not allowed is the use of adapus together with MX630P16 and MX648P16!

Replacement heating element for TR92-101 (please specify version of the TR92-101)

MX10 connection and distribution board

Miniature Sound Decoder, NEM 651 6-pin interface with strands, 19 x 8.6 x 2.9 mm, audio 1 W, 0.7 A.

Sound Decoder 19 x 11 x 3.1 mm, with 6 FU outputs, 13 connecting wires (2 x rail, 2 x motor, 2 x acc. Plus, mass, 4 foot outputs, 2 x speakers), 2 solder pads (Other FU outputs).

Power supply unit 600W (30V, 20A) Meanwell HLG-600H-30A; 26x14,5x5cm; 3.4kg;

Function Decoder, 10.5 x 8 x 2.2 mm, 0.7 A, 6 function outputs, with 8-pin interface NEM652 on wires.

Decoder MX635R with 8-pin interface NEM652 on wires, 26 x 15 x 3.5 mm, 1.8 A, 10 function outputs, connection for energy storage 16V (arbitrary capacity, also goldcap), semi-synchronous rectifier for higher motor current and total load capacity ( up to 1.8 A).General properties of ZIMO Decoders: DCC addresses 1 ... 10239, composite addresses 1 ... 9999 (SB 2017, Veren: 127), mm addresses 1 ... 80, functions F0 ... F12 ( .. F20 for sound), 14, 28 or 128 (external) driving steps, 256 or 1024 inter

Sound Decoder, 6-pin interface NEM 651, 14 x 10 x 2.6 mm, audio 1 W, 0.7 A.

Sound Decoder, 14 x 10 x 2.6 mm, audio 1 W, 0.7 A, with 4 fu outputs, 12 connecting wires.

Two dumbos, high volume and good bass reproduction. 50 x 15 x 14 mm, 4 ohm / 2 W.