Model: HO gauge DC. Class Eas-x four-axle high side car with numerous small parts attached and extensive lettering.

Model: HO gauge. Signal in standard construction with fine latticed brass mast. Maintenance free LED lighting. White LEDs for signal aspect Sh1 (shunting trip). Very easy and safe connection via only one plug socket. Required multiplexer item 5229 or 52292 for analogue (limited) and ­digital model train layouts. Patented socket for easy installation and connection. With plug and 7 LEDs, maintenance free. Signal aspects Hp0, Hp1, Hp2, Vr0, Vr1 and Vr2.Dimensions: height 7,9 cm.

With this update for the Lok-Control 2000, it gets the functionality of the TRIX Mobile Station. This means that the SelecTRIX 2 functionalities can be used, provided that a corresponding central unit (TRIX Gleisbox or Central Control 2000 with update chip) is available. A microcontroller is supplied to replace the controller in the Lok-Control 2000. You can do the conversion yourself.

The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all of the features, but the LokPilot 5 DCC is a pure DCC decoder and cannot be used on analog AC systems. This lack of flexibility is rewarded with a lower price. LokPilot 5 decoders are offered with all common interfaces. Operating modes: The LokPilot 5 DCC is a "pure-bred" DCC decoder. 14 to 128 speed steps are as natural as 2- and 4-digit addresses. Up to 32 functions can be triggered. Thanks to RailComPlus®,

With the servo extension cable you can extend your precision servo drive by up to 75cm. 3-pin J / R male to female J / R / Futaba.

Model: HO gauge. For level crossings with blinking light. With filligree brass mast, authentic varnishing and patented base socket for easy mounting. To connect blinker electronics item 5065. With 2 LEDs, maintenance free. Signal aspect Bü101.Dimensions: height 5 cm.

Model: HO gauge. Signal in standard construction. Finely detailed metal mast. Authentic varnishing. Suitable for all analogue and digital systems. Patented base socket. Very simple mounting and wiring. With 4 LEDs, maintenance free. Signal pictures Vr0, Vr1, Vr2. Suitable control module: Item 5220.Dimensions: height 6 cm.

Model: HO gauge. Signal in standard construction. Very easy assembly. Metal construction, fully painted. With patented base socket. With 4 LEDs, maintenance free. Signal aspects Vr0, Vr1, Vr2. Suitable control module: Item 5220.Dimensions: height 6 cm.

Model: HO gauge. Combination signal with fine brass mast and authentic varnishing. Patented base socket for easy mounting. With plug, 6 LEDs maintenance free, 2 speed preliminary indicators (Zs3 and Zs3v) distant signal function and marker light (Ke) for reduced braking distance. Signal aspects Hp0, Zs3, Ks1, Zs3, Ks1bl, Zs3, Ks2 and Zs3.Dimensions: height 7,8 cm. Only suitable for Viessmann multiplexer items 5229 and 52292.

Model: HOm gauge. SL-E1496 Code 75 Streamline left hand turnout with wooden sleeper replica and conductive frog, length 160 mm, radius 508 mm, angle 10 degrees.The Streamline Code 75 metre gauge rails with a low track profile height of only 1.9 mm and a parallel track spacing of 33 mm are particularly suitable for narrow gauge areas due to their low profile height and the resulting appearance to make them even more realistic.

Model: TT gauge. Switch construction is an essential component of any system and enables the connection of different lines or the construction of complex marshalling yards. Y-switches are used on the railway to direct trains from one track to two branching tracks that diverge at an acute angle. They allow both branches to be used in a smooth, relatively tight curve, saving space and making the track layout more compact. They are often used in stations, sidings, or in confined spaces to enable

Model: Pack of 12 plastic connectors for insulating track sections.

A Conrod spanner is a tool used to tighten or loosen nuts on the connecting rods of model railways. The tool looks like an ordinary spanner, but is small enough to hold the tiny nuts securely so they can be fitted and tightened.

Set of 20 track clamps for digital systems. The clamps bypass the insulation built into the points and ensure that the amount of current required for digital operation is always available. There are also special applications for analogue operation.

Ideal for younger model railroaders or those who have difficulty aligning small tracks and turnouts. It is simply placed on the track and the bar is pushed down like a ramp so that all parts are exactly aligned.

Model: TT gauge. This is a quarter track that you can use to further refine your track layout. You can also use it if you do not have enough space for a complete straight track. This piece of track in Code 80 with a length of 41 mm is ideal for building your layout and is compatible with other Code 80 tracks.

Model: TT gauge. To prevent trains from derailing, the end of a siding can be covered with a buffer stop.

Model: TT gauge. This straight piece of track is the backbone of any model railway and helps you build long tracks for your trains to run and admire. With a length of 166 mm, this Code 80 track is ideal for building your layout and is compatible with other Code 80 tracks.

VFLI E 4050 - Stadler Euro4000 DC analogic version

Furgão de Bagagens (topos com Foles) - CP Sorefame van

"Socorro Campolide" - CP Sorefame van

Furgão Gerador para carrugens climatizadas - CP Sorefame van

"Socorro Contumil" - CP Sorefame van

SET carruagens sorefame inter Regional 90s. - CP Sorefame coaches set